[Info-vax] LPD problems

[Tom Adams]

On Apr 13, 3:24 pm, jbriggs... at gmail.com wrote:
> On Apr 13, 2:31 pm, Tom Adams <tadams... at yahoo.com> wrote:
>
>
>
>
>
> > On Apr 13, 1:49 pm, Steven Schweda <sms.antin... at gmail.com> wrote:
>
> > > jbriggs... at gmail.com wrote:
> > > > > LPD Retrying failed job: LOGIN Number: 464 User: SYSTEM Status:
> > > > > %SYSTEM-F-REJECT
> > > > > , connect to network object rejected
> > > > $ telnet <serverip> 515
>
> > > > If it says "connection refused" then the Windows server isn't
> > > > listening.  You can either print directly to the printer's JetDirect
> > > > card (or equivalent) or install and configure LPR/LPD on the Windows
> > > > server.
>
> > >    Uh, "%SYSTEM-F-REJECT" is as close as you're likely to get
> > > to "Connection refused" on a VMS (TCPIP) system.
>
> > > > I have been told the server address and queue name.  The Microsoft
> > > > server is administered by another group
>
> > > > I enabled and started LPD/LPR via TCPIP$CONFIG
>
> > > > I set up the queue on VMS using  TCPIP$LPRSETUP
>
> > >    You do realize that we can't see (hence, verify) any of
> > > this, right?
>
> > Still trying to figure out what "this" is.
>
> > It is the tcpip$printcap.dat entry?
>
> > HTEST|htest:\
> >         :lf=/TCPIP$LPD_ROOT/000000/HTEST.LOG:\
> >         :lp=HTEST:\
> >         :rm=666.16.5.14:\
> >         :rp=RTO_HSFG89:\
> >         :sd=/TCPIP$LPD_ROOT/HTEST:
>
> > or the queue?:
>
> > Server queue HTEST, idle, on EESN::, mounted form DEFAULT
> >   /BASE_PRIORITY=4 /DEFAULT=(FEED,FORM=DEFAULT) Lowercase /OWNER=
> > [SYSTEM]
> >   /PROCESSOR=TCPIP$LPD_SMB /PROTECTION=(S:M,O:D,G:R,W:S)
>
> > BTW, we tried a name instead of a IP numeric address, but we go the
> > same reject message. (I altered the Ip numeric to 666)- Hide quoted text -
>
> > - Show quoted text -
>
>  :rm=666.16.5.14:\
>
> Are you sure there is not a typo in that host name?  It most certainly
> cannot be an IP address.- Hide quoted text -
>
> - Show quoted text -

I edited that when I posted here since I was not sure I should post a
real IP address.  I guess I did not make that clear in my post.