[Info-vax] Another hobbiest rx2600

[Jim Mehlhop]

Steven Schweda wrote:
> John H. Reinhardt wrote:
> 
> 
>>But there is no shortcut.  You have to install 2.26, then 2.29, then
>>3.13 and finally 3.15.  Don't forget to power cycle the system by
>>unplugging it (The MP is powered whenever the plug is in) after the
>>2.26 and the 2.29 upgrades.
>>
>>There is another upgrade to 3.32 imbedded in another upgrade - the
>>system 2.31c which is available at the rx2600 firmware page also.
> 
> 
>    As I said, I claim that I got from the original 2.10 to 3.30
> in three steps (2.26, 2.29, 3.30).  My last step involved
> PF_CPEAKSYS0231B, so PF_CPEAKSYS0231C would beat me, but, as
> the release notes say:
> 
>       [...]
>       3.  MP firmware must be at or upgraded to revision
>           E.02.29 prior to upgrading to iLO MP revision
>           E.03.32.
>       [...]
> 
> I see no mention there of 3.13 or 3.15.  But, hey.  If you have
> the time to waste, make all the intermediate stops you wish.

Thanks to all.  I didn't know about the history to get older versions.

Jim