[Info-vax] TK50s to the rescue !

[JF Mezei]

The challenge: move a 4000-600 mounted on a rack down to the lowest
position. This thing is heavy.

I needed to support the cabinet while removing the screws and then find
a way to lower the cabinet.

TK50s to the rescue ! I setup 2 stacks (about 4 high) of TK50s to
support the cabinet while removing the mounting screws. Then, using a
strong metal object as a crow bar, I would lift one side gently to
remove one TK50 and lower the cabinet back down, and then proceed with
same step on the other side.

Managed to bring the cabinet down to be supported by only 1 layer of
TK50s (enough clearance for wires to pass under it) and without having
to shutdown the node !