[Info-vax] TK50s to the rescue !

[David J Dachtera]

JF Mezei wrote:
> 
> The challenge: move a 4000-600 mounted on a rack down to the lowest
> position. This thing is heavy.
> 
> I needed to support the cabinet while removing the screws and then find
> a way to lower the cabinet.
> 
> TK50s to the rescue ! I setup 2 stacks (about 4 high) of TK50s to
> support the cabinet while removing the mounting screws. Then, using a
> strong metal object as a crow bar, I would lift one side gently to
> remove one TK50 and lower the cabinet back down, and then proceed with
> same step on the other side.
> 
> Managed to bring the cabinet down to be supported by only 1 layer of
> TK50s (enough clearance for wires to pass under it) and without having
> to shutdown the node !

 ^
/!\ Warning - Danger of electrical shock.
---
Disconnect mains before installing or deinstalling this unit.

Oh well, so much for placarding required by regulations...

D.J.D.