[Info-vax] graphics boards

[starchild]

Hello
I have the following VAXs
1 3100-10
1 4000-100A
The model 10 has the GPX graphics board inside, that will allow me to
run Softpc. The 100a is connected to a VT1300. The 10 is just sooo
slow that I moved Softpc over to the 100a. To my shock the 100a will
not run Softpc. I thought for sure the SPX board inside the 1300 would
support
the fonts used in Softpc. So I thought that since the vt1300 is really
a tone down 3100 I replaced the SPX board with the GPX board. Well the
1300 will not boot, well I get the opcom messages stating the software
load was good but no login screen. So my options are
1. go back to the 10
2. find a xterm that will support the GPX
I would prefer to go with option 2.
tks for any input