[Info-vax] how do you correlate the nic ports on the back of an 8640 to the IP device list in configure

[Kari Uusimäki]

On 3.8.2011 18:43, pcoviello at gmail.com wrote:
> I have an 8640 that I counted 7 available NIC ports on the back. and
> have the following in tcpip$config so where do I plug in my pipe for
> clustering/shadow? and configure the right port?
>
> thanks
> Paul
>
> back is laid out like this with the number 6 plugged into the X
>
>
>       X    O   O      O   O   O
>       O   O   O      O   O   O
>
>
>    Configuration options:
>     1  -  WE0 Menu (EWA0: TwistedPair 1000mbps)
>     2  -  WE1 Menu (EWB0: TwistedPair 1000mbps)
>     3  -  IE0 Menu (EIA0: TwistedPair 1000mbps)
>     4  -  IE1 Menu (EIB0: TwistedPair 1000mbps)
>     5  -  IE2 Menu (EIC0: TwistedPair 1000mbps)
>     6  -  192.168.20.21/24    facs2                 Configured,Active
>     7  -  IE3 Menu (EID0: TwistedPair 1000mbps)
>     8  -  IE4 Menu (EIE0: TwistedPair 1000mbps)
>     9  -  IE5 Menu (EIF0: TwistedPair 1000mbps)
>    10  -  IE6 Menu (EIG0: TwistedPair 1000mbps)
>    11  -  IE7 Menu (EIH0: TwistedPair 1000mbps)


A quick and easy way would be to just select the interface you want, 
plug in the cable and then check which interface it is with LANCP.


Kari