[Info-vax] page, swap and dump files; AUTOGEN, MODPARAMS.DAT, TESTFILES

[Rob Brown]

On Sat, 6 Aug 2011 at 09:36 -0000, Phillip Helbig---undress to reply 
wrote:

> In article <alpine.LFD.2.00.1108051349001.4139 at libra.gmcl.internal>, 
> Rob Brown <mylastname at gmcl.com> writes:
>
>> SWAPFILE1_SIZE information (for SYS$SYSTEM:SWAPFILE.SYS):
>>  	Feedback information.
>>  	   Old value was 9200, New value is 9200
>>  	   Maximum observed usage (blocks): 2048
>>  	Override Information - parameter calculation has been overridden.
>>  	   The calculated value was 8100.  The new value is 9200.
>>  	   SWAPFILE1_SIZE calculation has been set to current size by user.
>>  	   SWAPFILE1 will not be modified. The file size is within 10%
>
> OK, but do you have SWAPFILE1_SIZE=0?

Yes, I do.

> Looking at the above, it appears that it won't be modified since the 
> size is within 10%.

This must refer to 9200 (old value) being within 10% of 9200 (new 
value).  9200 is *not* within 10% of 8100.  (9200-8100)*100/9200=12%

> Also, the calculated value and the user-set value are also within 
> 10%.

I don't know what you mean by "user-set value".


-- 

Rob Brown                        b r o w n a t g m c l d o t c o m
G. Michaels Consulting Ltd.      (780)438-9343 (voice)
Edmonton                         (780)437-3367 (FAX)
                                  http://gmcl.com/