[Info-vax] DS20E memory question

[VAXman- at SendSpamHere.ORG]

In article <41c1443a-f59f-4b77-a42f-1ca6d9989fce at s2g2000vby.googlegroups.com>, dsnyder <danieldsnyder at gmail.com> writes:
>On Aug 8, 2:09=A0pm, "H Vlems" <hvl... at freenet.de> wrote:
>> >>1-Will DS20(E) memory work in a DS10?
>>
>> > I populated my DS10L and DS10 with memory (the 512MB SIMMs) taken from =
>the
>> > DS20E. =A0The DS10* just will not respect anything larger like the 1GB =
>SIMMs
>> > which was quite a disappointment. :(
>>
>> OK, so I'll put two 128 MB memory boards that came out of =A0the DS20E in=
>to
>> the DS10.
>> It has two 256 MB boards already so that's a noticable increase. Thank yo=
>u
>> Brian!
>> I'm used to AlphaServer 1200 and ~800 systems and these modern DS systems
>> are really
>> a completely new world for me.
>>
>> Incidentally, the DS20E is fitted with a KZPCC three cheannel RAID
>> controller ("I20"), a PZA0 on the console.
>> That's Tru64 only, right, no VMS support?
>> Hans
>
>I have a DS20, DS20E and ES40 and have found the memory DIMM part
>numbers
>the same in all these machines, DEC 200pin, 100MHz dimm modules.

True and with the DS10 too, but the DS10 will not work with the 1GB DIMMs.

-- 
VAXman- A Bored Certified VMS Kernel Mode Hacker    VAXman(at)TMESIS(dot)ORG

All your spirit rack abuses, come to haunt you back by day.
All your Byzantine excuses, given time, given you away.