[Info-vax] wrong screen resolution with new node

[JOUKJ]

Phillip Helbig---undress to reply wrote:
> In article <4d4544f1$1 at news.langstoeger.at>, peter at langstoeger.at (Peter
> 'EPLAN' LANGSTOeGER) writes: 
> 
>> In article <ii1fh2$pkb$1 at online.de>, helbig at astro.multiCLOTHESvax.de (Phillip Helbig---undress to reply) writes:
>>> OK, there was a bug in CLUSTER_CONFIG_LAN.COM but now I have fixed that 
>>> and successfully added a new node to the cluster. 
>> What bug? Only in your procedure (or in ours, too)?
> 
> Yes, in SYS$MANAGER:CLUSTER_CONFIG_LAN.COM:
> 
> $!following line changed since procedure was not updated with LANCP
> $!IF F$LOCATE("LAN MOP DLL",line) .EQ. F$LENGTH(line) THEN -
> $ IF F$LOCATE("LAN DLL", line) .EQ. F$LENGTH(line) THEN -
> 
> 
>>> $   define /system /executive_mode decw$server_pixel_depth 24
>>> $   define /system /executive_mode decw$server_refresh_rate 60
>>> $ endif
>> Don't know (e.g. if an ELSA supports 24).
>> I don't have these logicals in my systems.
> 
> I'll do some experimenting.  My starting assumption is that the card in 
> the (newer) XP1000 is at least as capable as that in the (older) 1200.  
> Hopefully I can test things without having to reboot too much.
> 
Some Info on the cards capability is given in:
    DECW$DEVICE_CONFIG_GZ.COM
(change the "GZ" for any other device type to get info on that one)

My one is running fine in 24bit depth (1280x1024) mode for years now.

                Jouk