[Info-vax] Hopelessly Pathetic Hardware Parts
Hans Vlems
hvlems at freenet.de
Thu Aug 30 04:12:42 EDT 2012
On 28 aug, 21:08, Marc Van Dyck <marc.gr.vand... at invalid.skynet.be>
wrote:
> Hans Vlems explained on 27/08/2012 :
>
>
>
>
>
> > On 25 aug, 10:20, Marc Van Dyck <marc.gr.vand... at invalid.skynet.be>
> > wrote:
> >> Hans Vlems used his keyboard to write :
>
> >>> On 23 aug, 21:07, Marc Van Dyck <marc.gr.vand... at invalid.skynet.be>
> >>> wrote:
> >>>> ChrisQ was thinking very hard :
>
> >>>>> On 08/23/12 04:42, Paul Sture wrote:
> >>>>>> This is a completely different story to the HP Microserver I bought last
> >>>>>> December.
>
> >>>>>> These come with a screwdriver and enough correct screws to fit 4 disks,
> >>>>>> all neatly arranged on the inside of the front door. Mine has empty
> >>>>>> slots for 4 further screws. Presumably if I had ordered the same model
> >>>>>> without an optical drive, those screws would be present.
> >>>>> Well, they must have learned something from Compaq then :-). Compaq
> >>>>> machines came with a set of spare screws inside the case, in their own
> >>>>> little tapped holes, specially for the purpose. You could get any
> >>>>> Compaq machine to bits and replace drives, whatever with a single torx
> >>>>> driver.
>
> >>>>> Properly sorted...
>
> >>>>> Regards,
>
> >>>>> Chris
>
> >>>> That reminds me of the VAXstation 9000 series, that were so well
> >>>> engineered that you could exchange all replaceable parts with no tool
> >>>> at all. I still have a working VAXstation 9600 + expansion box at
> >>>> home...
>
> >>>> --
> >>>> Marc Van Dyck- Tekst uit oorspronkelijk bericht niet weergeven -
> >>>> - Tekst uit oorspronkelijk bericht weergeven -
> >>> What is a VAXstation 9600? Or did you mean a VAXstation 4000-96?
>
> >> Yes, 4000-96, sorry for the mistake.
>
> >> --
> >> Marc Van Dyck- Tekst uit oorspronkelijk bericht niet weergeven -
>
> >> - Tekst uit oorspronkelijk bericht weergeven -
>
> > Nice system Marc. I own VAXstation 4000-90A's and consider them pretty
> > fast.
> > The build quality is good, one of the three has a hardware problem: a
> > nonfunctional grphics card.
>
> > Hans
>
> Yes it is a nice system. Present from my manager when I left Digital
> in January 1999. It was purchased as a 90A but the motherboard failed,
> and as there was no 90A in stock, a 96 motherboard was installed
> instead. I did not complain !
>
> It's now in cluster with an XP900 and an RX2600 should follow soon,
> for the mythical 3-architecture cluster...
>
> --
> Marc Van Dyck- Tekst uit oorspronkelijk bericht niet weergeven -
>
> - Tekst uit oorspronkelijk bericht weergeven -
In 1988 I got my first VAX, a VAXstation 2000. It was replaced by a VS
3100-GPX, a
VS 4000-60 to what it is now: a VS 4000-90A.
I've never used a 4000-96 and am still looking for a replacement
motherboard....
Hans
More information about the Info-vax
mailing list