[Info-vax] %SYSTEM-F-ACCVIO after fresh VMS installation

MG marcogbNO at SPAMxs4all.nl
Sun Jan 29 19:18:20 EST 2012 

On 29-1-2012 12:23, MG wrote:
> [...]

After yet another reinstallation, more and different errors!
------------------[ begin ]------------------
AlphaServer DS10 466 MHz Console V7.3-1, Feb 27 2007 13:17:58

CPU 0 booting

(boot dya0.0.0.15.0 -flags 0)
block 0 of dya0.0.0.15.0 is a valid boot block
reading 1230 blocks from dya0.0.0.15.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 99c00(629760)
initializing HWRPB at 2000
initializing page table at 3fd2a000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code


     OpenVMS (TM) Alpha Operating System, Version V8.4
     © Copyright 1976-2010 Hewlett-Packard Development Company, L.P.

%DECnet-I-LOADED, network base image loaded, version = 05.17.00

%DECnet-W-NOOPEN, could not open SYS$SYSROOT:[SYSEXE]NET$CONFIG.DAT

%RMS-W-RTB, 23352 byte record too large for user's buffer
%RMS-W-RTB, 29555 byte record too large for user's buffer


%DCL-E-OPENIN, error opening 
SYS$SYSROOT:[SYS$STARTUP]VMS$CONFIG-050_OPCOM.COM;
as input
-RMS-E-FNF, file not found
%SYSTEM-I-BOOTUPGRADE, security auditing disabled
%JBC-E-OPENERR, error opening SYS$COMMON:[SYSEXE]QMAN$MASTER.DAT;
-RMS-E-FNF, file not found
%LICENSE-F-EMTLDB, license database contains no license records
%SYSTEM-I-BOOTUPGRADE, security server not started
%SYSTEM-I-BOOTUPGRADE, ACME server not started
NET$STARTUP, Network not started due to UPGRADE boot
%SYSTEM-W-NOSUCHDEV, no such device available
%LICENSE-E-NOAUTH, DEC OPENVMS-ALPHA use is not authorized on this node
-LICENSE-F-NOLICENSE, no license is active for this software product
-LICENSE-I-SYSMGR, please see your system manager
Startup processing continuing...

%SYSTEM-I-BOOTUPGRADE, Coordinated Startup not performed
%SYSTEM-F-OPCDEC, opcode reserved to OpenVMS fault at 
PC=000000000001C9E4, PS=00
00001B

   Improperly handled condition, image exit forced.
     Signal arguments:   Number = 0000000000000003
                         Name   = 000000000000043C
                                  000000000001C9E4
                                  000000000000001B

     Register dump:
     R0  = 0000000000000001  R1  = 0000000000000005  R2  = 00000000008FB0C8
     R3  = 000000000097A115  R4  = 000000000097A530  R5  = 000000000097A094
     R6  = 00000000008FAB1C  R7  = 0000000000000200  R8  = 000000000097A000
     R9  = 000000000097A910  R10 = 0000000000000005  R11 = 0000000000000001
     R12 = 000000000097A110  R13 = 0000000006BA8001  R14 = 0000000000000005
     R15 = 000000000097A510  R16 = 000000007AE4B158  R17 = 0000000000000000
     R18 = 000000000097A115  R19 = 000000000097A536  R20 = 0000000000000002
     R21 = 000000007AE4B204  R22 = 000000007AE4B274  R23 = 0000000000000070
     R24 = 000000007AE4B148  R25 = 0000000000000001  R26 = 00000000008EFEA4
     R27 = 00000000009F44E0  R28 = 0000000000000000  R29 = 000000007AE4B140
     SP  = 000000007AE4B140  PC  = 000000000001C9E4  PS  = 000000000000001B


CDSA-I-InitCDSA, Initializing CDSA...
%DCL-W-ACTIMAGE, error activating image CMA$OPEN_RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]CMA$OPEN_RTL.EXE
;1
-IMGACT-F-ISD_SIZ, image section descriptor length is invalid
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
CDSA-I-InitCDSA, CDSA Initialization complete

CDSA-I-InitSecDel, Initializing Secure Delivery...
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
%DCL-W-ACTIMAGE, error activating image PTHREAD$RTL
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]PTHREAD$RTL.EXE;
1
-SYSTEM-F-VA_IN_USE, virtual address already in use
CDSA-I-InitSecDel, Secure Delivery Initialization complete

%DCL-W-ACTIMAGE, error activating image SMI$OBJSHR
-CLI-E-IMGNAME, image file 
LETHUC$DKA0:[SYS0.SYSCOMMON.][SYSLIB]SMI$OBJSHR.EXE;1
-IMGACT-F-BAD_FIXUPVEC, the fixup vector contains inconsistent data
%DCL-W-IVVALU, invalid value syntax - see command documentation
%DCL-W-IVVERB, unrecognized command verb - check validity and spelling
  \PARAMETERS\
%DCL-W-IVVERB, unrecognized command verb - check validity and spelling
  \PARAMETERS\
%DCL-W-IVVERB, unrecognized command verb - check validity and spelling
  \PARAMETERS\
   SYSTEM       job terminated at 30-JAN-2012 01:14:02.73

   Accounting information:
   Buffered I/O count:               7367      Peak working set size: 
     7584
   Direct I/O count:                 3936      Peak virtual size: 
   188560
   Page faults:                      9635      Mounted volumes: 
        0
   Charged CPU time:        0 00:00:04.77      Elapsed time:       0 
00:00:15.63
-------------------[ end ]-------------------

I have absolutely no idea what's going on...

  - MG

More information about the Info-vax mailing list