[Info-vax] %SYSTEM-F-ACCVIO after fresh VMS installation

[Jeremy Begg]

Hi MG,

I'd say your DS10 hardware is kaput.  It could be anything in the path from 
the disk to the CPU.  And RAM can fail too.

Regards,

	Jeremy Begg

MG wrote:
> On 29-1-2012 0:23, MG wrote:
> 
>> [...]
> 
> 
> I have swapped out the disk I had thought to be defective, but errors
> remain!  I don't have too many 68-pin disks and when I booted from an
> 80-pin (SCA) disk with a converter, it installed fine and such, but
> during the startup it would hang each time at the MSCP disk serving
> configuration ("%MSCPLOAD-I-CONFIGSCAN").
> 
> What else could be going on?  The RAM can't be it, at least I really
> don't think so, as I've been running the system with the same RAM for
> quite some time now and only until recently I've been getting these
> strange and very frustrating errors.
> 
>  - MG