[Info-vax] Reconfiguring VMS 6.2 - Shadow set question

[Jan-Erik Soderholm]

Stephen Hoffman wrote 2012-10-22 12:26:


>
> Now...
>
> You could have hardware problems with the disk devices that were specified
> in the shadowset MOUNT commands, or they could have been removed, or you
> could have one of the usual SCSI hardware problems with this box.  The only
> way to be sure is to open the box and look.

He *wrote* that DKA200 and DKA400 was (or had been) external disks.
And he also wrote that he *knew* that they where "gone".



> Given that you are not particularly experienced with VMS, I would strongly
> recommend nuking and paving this disk.  A fresh installation...

No no no...

*Is* there any actual problem with this system at all ??

Apart from the *informational* message at the MOUNT, but that is
just "FYI", so to speek. It's not an error, from VMS's point of view.

There is not any major problem here, two disks are "gone" and no
re-install in the world will get them back...

Jan-Erik.