[Info-vax] OT: obscure PDP11 OSes (even more dinosaury)

Johnny Billquist bqt at softjar.se
Mon Jun 22 12:39:59 EDT 2015


On 2015-06-22 18:29, Jan-Erik Soderholm wrote:
> Johnny Billquist skrev den 2015-06-22 18:19:
>> On 2015-06-22 17:51, Jan-Erik Soderholm wrote:
>>> Browsing around in our development system, I found a MAR
>>> file with the following as a comment at the top:
>>>
>>> ;
>>> ; FUNCTIONAL DESCRIPTION:
>>> ;
>>> ; DOWN_LINE_LOAD.
>>> ; THE ALLOCATED TT_LINE IS DEALLOCATED. A MAILBOX IS CREATED TO BE
>>> ; USED TO COMMUNICATE WITH A SUBPROCESS, WHO TAKES CARE OF
>>> ; THE COMMUNICATION WITH THE PDP-11/23 AND LOADS THE 11/23 WITH
>>> ; A RSX-11/S SYSTEM...
>>> ;
>>>
>>> So you could "load" a PDP with an RSX system over a serial line!?
>>> And the VMS system must have had a RSX-11/S "image" available?
>>>
>>> Maybe I read to much into that comment, they might just be saying
>>> that the PDP actualy is running a RSX-11/S system... :-)
>>
>> No, you understand this right. PDP-11s can downline load RSX-11S. RSX-11S
>> is a diskless system that needs a host to boot from.
>>
>> The host can can be either RSX-11M, RSX-11M-PLUS or VMS.
>>
>> The loading is done with MOP, and can be done over serial lines using
>> DDCMP, or over Ethernet.
>>
>>      Johnny
>>
>
> OK, I see. In this case the download was done though a program
> called DLL.EXE, which I *think* was something homebuilt, but
> I can not check since I can't find it. DLL.EXE was spawned as
> a subprocess from the source the comment was quoted from...
>
> This is in the archaeological parts of our development system. :-)

I would think DLL is a standard part of the DECnet dist. It's the part 
of MOP that handles downloads. Have the same name in RSX. (Well, 
DLL.TSK, but anyway...)

	Johnny




More information about the Info-vax mailing list