[Info-vax] rx2620 power supplies / VRM voltage low

[Scott Dorsey]

Hans Vlems  <hvlems at freenet.de> wrote:
>I' ve never seen an rx2620 from the inside, I only have an rx2600. Are there unused disk power connectors inside the box? That would provide access to +5V and +12V to begin with.

There's one big connector that provides power to the cpu board, and all of
the supply rails are accessible through that.  It's a Molex so you can check
them without pulling the connector out, and it's color coded so you should
be able to figure out what the nominal voltages are without much work.
--scott
-- 
"C'est un Nagra. C'est suisse, et tres, tres precis."