[Info-vax] rx2620 power supplies / VRM voltage low

[Hans Vlems]

The rx2600 mainboard swap issues msy have been my post. On an rx2600 I had to swap the motherboard to use the pci expansion cage. That fits onto a large connector with many pins soldered on said motherboard. I did just that and the motherboard did not recognize the cpu's id's. The replacement board was not new and had been configured before, obviously those cpu's had different id's. IIRC there is an on board tool to fix the issue but it's only accessible to a sufficiently privileged user. Not the box owner but an HP employee...
So i wouldn't recommend that solution though an rx2660 may behave differently.
Even then only do this with the correct cpu tool.
Hans