[Info-vax] Access to perform FTP tasks

[Jan-Erik Söderholm]

Den 2019-06-20 kl. 11:57, skrev Antony Lamberton:
> Hi All,
> 
> Thanks for helping.
> 
> I'll answer what i can from the multiple posts.
> 
> I have limited knowledge on the language, where would i do the DIRECTORY/FULL ?
> 
> I copied the working account to create the non working account, so the access is the same.
> There is no error when a successful user completes the task, here is what shows on the screen.
> 
> 331 Password required for WASFTP.
> 230-You are using a restricted system, if you are not authorised to do so you ma
> y not proceed to use.     STK_RP_20
> 230 User WASFTP logged in.Low Stock Report - Full
> 250 CWD command successful.RT
> Error level is ERROR.0)   0
> 257 "/ALA" is current directory.
> 550 /ALA/STK: Cannot create a file when that file already exists.
> Error level is SUCCESS.   0000
> 250 CWD command successful.000
> 257 "/ALA/STK" is current directory.
> Local directory now DKA0:[REPORTS.CCP_STOCK.STOCK]
> 200 PORT command successful.
> 150 Opening ASCII mode data connection for STK_RP_20.PRT.92.
> 226 Transfer complete.
> local: DKA0:[REPORTS.CCP_STOCK.STOCK]STK_RP_20.PRT.92  remote: STK_RP_20.PRT.92
> 85127 bytes sent in 00:00:00.01 seconds (6394.76 Kbytes/s)
> 221
> %DELETE-I-FILDEL, DKA0:[POWERHOUSE.LOG.STOCK]STK_FE_37XS_892543491.TMP;1 deleted
>   (561 blocks)
> *****************************************************************************
> File STKREPORT:STK_RP_20.PRT;0 has been transferred to /ALA/STK
> *****************************************************************************
> Press RETURN to continue.
> 
> 
> I'm picking up VMS as i go along, so not sure on the logicals side.
> 
> I can generate the report using the account, but cannot ftp that report to a local folder.
> 
> The local folder exists where the folder for the account that can perform the task is.
> 

I do not fully understand...

 From your log it looks like the "local" system is an VMS system!?
Can you explain better what the system is that you are running
the FTP tool on. VMS or some "PC".

Hm, is the tool run on a VMS system and copying a file into a PC
system (where the "FTP server" part is running)?

 > where would i do the DIRECTORY/FULL ?

On the VMS system where the the file you mentioned before is located.

Like:

$ DIRECTORY/FULL STKREPORT:STK_RP_20.PRT

Of particular interest are any possible ACL entries that might
give the old user access to the file but not the new one...

 > here is what shows on the screen.

Do you have the same log from the failing user?

Maybe the new user does not have access to the file on the
VMS system that you are trying to copy using FTP?