[Info-vax] 3rd party SATA SSD usage on RX2660+P400 in a production environment?

[David Turner]

Well, Rod, I have unused HGST SAS Drives 12G that are nowhere near your 
pricing and I have them in stock and I have tested them with VMS on HPE 
Integrity rx2800 i4 and i2. No doubt they work but use a P800 and a 
PCI-e/PCI-X backplane. The crappy onboard controller on the rx2660 
cannot handle anything (512Mbit/sec) compared with the P800 at 3Gbit or 
even the P812 6Gbit (works great with SSD)

DT


On 6/28/2019 12:36 PM, Rod Regier wrote:
> Has anyone used 3rd party 2.5" SATA SSD's
> (like say the Samsung 860 EVO or earlier)
> on a RX2660 system equipped with a P400 BBWC RAID controller
> in a production environment?
> 
> https://www.samsung.com/us/computing/memory-storage/solid-state-drives/ssd-860-evo-2-5--sata-iii-250gb-mz-76e250b-am/
> 
> The factor of 16+ price difference between the new HPE SAS SSD offering versus
> the new Samsung EVO 860 family (both 2.5") makes this an attractive option.
> 
> N9X95A        - $US3133 MSRP
> MZ-76E250B/AM -   $US57 from Amazon.com
> 
> 
> Today I did a test using a similar SATA SSD on such a configuration
> and I was able to boot OpenVMS and successfully run the HP Diskblock benchmark
> on that SATA SSD drive and on a 10KRPM SAS drive for comparison.
> 
> Impressive benchmark improvement with the SSD.
> 
> What worries me about such usage is lack of TRIM and some of the more subtle functions for the SATA SSD under OpenVMS in the long term.  The P400 controller itself is rated to support SATA drives.
> 
> https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04111741.pdf
> 
> "3G SAS technology delivers high performance and data bandwidth up to 300 MB/s per physical link and contains full compatibility with 1.5G SATA technology."
> 
> I would suspect that the controller handles most of the general SAS vs SATA issues.  HPE SAS$UTIL display shows SATA and SAS identifiers when displaying the characteristics of the attached drives.
> 
>                 \\
> 
> Diskblock stats with a 100MBy contiguous test file for each:
> 
> RX2660/1x1.6, P400 BBWC RAID controller, 1x10KRPM SAS disk as JBOD
> 
> Total I/Os completed:    106178
> Run time:                120 Seconds
> I/Os per second:         884.8
> mS per I/O:                1.1
> Throughput:              442.4 KBytes per second
> 
> RX2660/1x1.6, P400 BBWC RAID controller, 1XSSD SATA disk as JBOD
> 
> Total I/Os completed:    1017417
> Run time:                120 Seconds
> I/Os per second:         8478.5
> mS per I/O:                0.1
> Throughput:              4239.2 KBytes per second
> 
> 
>   
>