[Info-vax] Building a VAXcluster with SIMH and real hardware

[Dave Froble]

On 8/31/2020 1:14 PM, Antonio Carlini wrote:
> I'm trying to build a VMS cluster using SIMH as the disk server and a VAXstation 4000-60 as a satellite. The VS4060 has a disk and I can boot VMS on that and then SET HOST to/from the SIMH node, so there's no network connectivity issue.
>
> On the SIMH node I did the following:
>   - installed VMS V7.2
>   - I picked Y for all the options except the MGMT Station stuff
>   - I picked Phase IV
>   - Completed the install
>   - Installed the Hobbyist PAKs (all of them)
>   - @NETCONFIG to set up the DECnet Phase IV stuff
>   - Installed UCX V4.1

If I remember correctly, TCP/IP V5 was available on VMS V5.0.  But, I 
could be mixed up, as usual.


-- 
David Froble                       Tel: 724-529-0450
Dave Froble Enterprises, Inc.      E-Mail: davef at tsoft-inc.com
DFE Ultralights, Inc.
170 Grimplin Road
Vanderbilt, PA  15486