[Info-vax] interconnect nodes

[Edgar Ulloa]

El martes, 24 de noviembre de 2020 a las 19:59:53 UTC-5, Dave Froble escribió:
> On 11/24/2020 5:38 PM, Edgar Ulloa wrote: 
> > I have this scenario 
> > 3 ovms 8.4 nodes each in a city 
> > node B communicates well with A and C 
> > nodes a and c there is no communication between them. 
> > If I have no way to intercommunicate them via routers or physical gategays, 
> > is there any way to make them communicate with each other using node b as if it were a gateway? 
> > the communication will be sftp ssh telnet 
> > this can? 
> > any ideas? 
> >
> Well, need some details before considering any solutions. 
> 
> Assuming IP as you've indicated, (SFTP, SSH, and TelNet), all that is 
> required is ethernet connectivity. 
> 
> Big question, how does A and C communicate with B? 
> 
> Assuming that there is ethernet involved, then if A and C are both 
> plugged into the same network switch (probably doesn't have to be a 
> single switch, but that's how I'd do it) then they are connected. 
> 
> I'm guessing it's not that simple, or, you wouldn't be asking here. 
> 
> -- 
> David Froble Tel: 724-529-0450 
> Dave Froble Enterprises, Inc. E-Mail: da... at tsoft-inc.com 
> DFE Ultralights, Inc. 
> 170 Grimplin Road 
> Vanderbilt, PA 15486

Hi Dave 

each node  is  stand alone and will not be a cluster
the way to access is just telnet and a little router between Node A to B   and another B to C

>From node B I get  access to each city without problem
but node A and node C there is no ping between them and for now there is no budget to invest in telecommunications.

It occurred to me that I could communicate Node A with Node C using B as a gateway.
Even try to put a route $ set route xxxx,. / Gateway = nodeb but not work.

Much appreciated all for the time