[Info-vax] new VMS setup

[pcoviello at gmail.com]

well we have somewhat successfully connected the 3Par to the existing servers. the rx2620 has one cable and has 2 paths to the 3Par.  now the existing production server rx8640 has 2 cables and 3 paths!
and I got this from VSI. 

according to the 3Par I have 5 paths and with 3 free. I have moved the cables around on the switch and the ports follow. which tells me the switch is setup correctly?  I even attempted to hook it up to the Brocade on said free port. and Brocade sees the SAN. but port is still free

anyone have any thoughts as to how to get those free ports working? or what could be wrong?

thanks


OK you have a 3PAR configuration issue

VMS can see the port but the port is saying it has no device that it is presenting.

Probing Target 6 ==========================================================

Port WWID:   2102-0002-AC01-A6E1
Node WWID:   2FF7-0002-AC01-A6E1

Target = 6. LUN = 0.
----------------------
Standard Inquiry failed, status = 908
Unable to get target data at target 6 LUN 0, status = 908 (SS$_NOSUCHDEV)


If you look at the other 3PAR ports you see that each of them have a SCC LUN0 and each port reports the number of device and then each device.

Probing Target 5 ==========================================================

Port WWID:   2002-0002-AC01-A6E1
Node WWID:   2FF7-0002-AC01-A6E1

Target = 5. LUN = 0.
----------------------
Devname:     Not Configured
Vendor ID:   3PARdata
Product ID:  ARRAY           
Devtype:     C (SCC)
Rev Level:   3315
Pg00 supported, Pg83 supported, Pg80 unsupported.
Standard UDID status = 2c
Vendor-specific UDID status = f4

Reported LUN count = 38. at target 5.

You will need to work this with your 3PAR support

Jilly




OK you have a 3PAR configuration issue

VMS can see the port but the port is saying it has no device that it is presenting.

Probing Target 6 ==========================================================

Port WWID:   2102-0002-AC01-A6E1
Node WWID:   2FF7-0002-AC01-A6E1

Target = 6. LUN = 0.
----------------------
Standard Inquiry failed, status = 908
Unable to get target data at target 6 LUN 0, status = 908 (SS$_NOSUCHDEV)


If you look at the other 3PAR ports you see that each of them have a SCC LUN0 and each port reports the number of device and then each device.

Probing Target 5 ==========================================================

Port WWID:   2002-0002-AC01-A6E1
Node WWID:   2FF7-0002-AC01-A6E1

Target = 5. LUN = 0.
----------------------
Devname:     Not Configured
Vendor ID:   3PARdata
Product ID:  ARRAY           
Devtype:     C (SCC)
Rev Level:   3315
Pg00 supported, Pg83 supported, Pg80 unsupported.
Standard UDID status = 2c
Vendor-specific UDID status = f4

Reported LUN count = 38. at target 5.

You will need to work this with your 3PAR support