[Info-vax] BL860i2 blade unexplained system disk slowdowns

[vaxinf@gmail.com]

May be it is possible to boot from a USB- or DVD-device. Then you'll see 
if there is a problem with your system.

Eberhard

Am 08.06.2022 um 14:15 schrieb Simon Clubley via Info-vax:
> On 2022-06-07, Kenneth Randell <kennethnospam.randell at gmail.com> wrote:
>>> Do the figures go back to normal _immediately_ after a reboot without
>>> any power-off cycling or do you need to power off the machine and leave
>>> it off for a while before they go back to normal ?
>>>
>>> I am wondering if there's some subtle thermal-related issue due to
>>> damage caused when the power outage occurred.
>>>
>> A reboot without power-cycle immediately clears the problem; no need to turn it off and leave it off for any length of time.  According to the O/A in this C7000, there are no thermal issues;  the ambient temperature of the blade sits at around 20 degrees C as shown below:
>>
> I'll admit I'm out of ideas then. I think it's time for you to get
> support involved if a reboot without a power-cycle immediately clears
> the problem because that doesn't sound like a normal case of a failing
> component gradually degrading during use unless its left to cool down.
>
> Simon.
>