[Info-vax] BL860c i2 Network Issues

[funniray]

On Wednesday, March 16, 2022 at 3:06:11 PM UTC, Robert A. Brooks wrote:
> On 3/16/2022 10:53 AM, funniray wrote: 
> 
> > The OA is running firmware version 4.97 Jan 28 2021.
> That's the version I'm running, also.
> > I'm not quite sure what you mean by VC, but if you mean the ethernet switches both are running 15.0(2)SE11
> I guess it depends on what modules you have in the interconnect bays; not all modules in the interconnect 
> bays use the VirtualConnect firmware. 
> 
> I've got redundant "HP VC FlexFabric 10Gb/24-port" modules in slots 1/2 
> 
> With those, I'm using VirtualConnect firmware V4.85 
> 
> -- 
> 
> -- Rob

Alright, so I double checked and apparently networking doesn't work on Windows Server 2008 R2 for Itanium Based Systems either.
Both of my i2 blades produce the same results where there's 16 interfaces and 6 interfaces are up. If I turn off 1 switch, then it drops to only 3 interfaces being up.
DHCP doesn't work on any adaptor and setting a static IP doesn't work either.

Does anyone have any suggestions for what I can try?

Thanks,
Ethan