[Info-vax] BL890 i2 / c3000 enclosure help

[Gianluca Bonetti]

On Thursday, 8 September 2022 at 21:50:06 UTC+2, vax... at googlemail.com wrote:
> What you can do is the following: 
> log into ilo and start the live log. 
> Then start to power on the board in the CM Mode via "pc on" in another 
> session. Look at the live log output that tells you where the problem 
> starts. I assume that the c3000 has not enough power. 
> Hope this helps 
> Eberhard 

Hello Eberhard!
Thank you for sharing this information. I'll try it.

The C3000 is actually loaded with 6 power supplies, and they are showing as healthy.
Single BL460 Xeon modules do power up, even 8 together.
Maybe not enough power for Itaniums?
I'll check with these live logs, any more information logged there will be precious.

Thanks
Gianluca