[Info-vax] Integrity rx2800 i2 trying to boot from MSA2050

[eh]

Did you look into the SAN-switch message logs?

Am 24.07.2023 um 11:20 schrieb Tom Wade via Info-vax:
> Hi,
>
> Hoping to hear from anyone who has got an rx2800 i2 booting from an 
> MSA SAN using 16 Gb/s fiber HBAs.  I am trying to clone a system disk 
> from another rx2800 booting from an EVA SAN.
>
> Hardware Details.
>
> HP Integrity rx2800 i2 1.60GHz/6.0MB 8 CPU
> B9F24AR Fiber HBA
> MSA-2050 SAN
>
> Software
> VSI OpenVMS 8.4-2L1.
> Update 1.0 installed.
> Unclustered.
>
> ---
> OpenVMS installed on internal SCSI drive from VSI DVD OK.
> When booted from the internal drive, VMS can see the SAN $1$DGA disks, 
> and perform I/O to them.
>
> I restored an /IMAGE saveset of the source machine (same hardware type 
> and O/S version) onto one of the fiber disks.  I then added a boot 
> entry using SYS$MANAGER:BOOT_OPTIONS.COM for this disk and added it to 
> position 1.
>
> efi$bcfg: $1$dga3021: (Boot000A) Option successfully added
> efi$bcfg: $1$dga3021: (Boot000B) Option successfully added
>
> Option 2 (List) shows
>
> Entry  Description Options
> -----  ----------------------------------------------------------
>
> -------------
>    1   OpenVMS 8.4 on SAN $1$DGA3021 FGA0.2070-00C0-FF52-E296
>          $1$DGA3021 PCI(0|a|0|0) Fibre(207000C0FF52E296,LunF000000000000)
>    2   OpenVMS 8.4 on SAN $1$DGA3021 FGA0.2470-00C0-FF52-E296
>          $1$DGA3021 PCI(0|a|0|0) Fibre(247000C0FF52E296,LunF000000000000)
>    3   OpenVMS on DKA0: PKA0.0
>          DKA0 PCI(0|1|0|0) Scsi(Pun0,Lun0)
>
> When I try to boot from the SAN device, I get
>
> Booting OpenVMS 8.4 SAN disk $1$DGA3021 FGA0.2470-00C0-FF52-E296
> Boot Failed. OpenVMS 8.4 SAN disk $1$DGA3021 FGA0.2470-00C0-FF52-E296
> Booting OpenVMS 8.4 SAN disk $1$DGA3021 FGA0.2070-00C0-FF52-E296
> Boot Failed. OpenVMS 8.4 SAN disk $1$DGA3021 FGA0.2070-00C0-FF52-E296
>
> I originally tried it with the unpatched DVD installed operating system.
>
> When that failed, I removed the boot entries, applied Update 1.0 to 
> VMS on the internal SCSI drive, rebooted (from the internal drive), 
> and re-added the SAN boot options.  I did this because of information 
> contained in a PDF document on the DVD, which suggested Update 1.0 was 
> required.  A link to the document on the VSI web site is
>
> https://docs.vmssoftware.com/docs/ENABLING_16GB_FC_HBAS_FOR_BOOT.pdf
>
> This made no difference.
>
> I then did an /IMAGE copy of the patched SCSI system disk onto another 
> SAN drive, created new boot entries for this, and attempted to boot 
> from that drive.  I did this to make sure the version of OpenVMS on 
> the SAN was fully patched to Update 1.0.
>
> Again, the same boot failure.
>
> The document describes booting into the EFI shell and the device 
> manager, which I also did.  The EFI shell was unable to see any file 
> systems on fiber SAN:
>
> > EFI Shell list (fs entries)
> >
> >   fs0    :Removable HardDisk - Alias hd9a0b blk0
> >           PcieRoot(0x30304352)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi
>
> (0x0,0x0)/HD(1,GPT,291986A1-20CC-11EE-A1D6-AA000400FEFF)
> >   fs1    :Removable HardDisk - Alias hd9a0d blk1
> >           PcieRoot(0x30304352)/Pci(0x1,0x0)/Pci(0x0,0x0)/Scsi
>
> (0x0,0x0)/HD(3,GPT,291986A0-20CC-11EE-A1D7-AA000400FEFF)
> >
> > VMS_SHOW EFI output
> >
> > fs0:\> \EFI\VMS\VMS_SHOW
> >
> >   Searching    6 NET Device entries...
> >   Searching    7 UEFI Device entries...
> >   Searching   66 PCI Device entries...
> >   Searching   65 VMS Device entries...
> >
> > VMS: DKA0        EFI: fs0       Vol: V8_4_2L1   DevInfo: HP      
> LOGICAL
>
> VOLUME  6.64
> > fs0:\>
>
> No files found on fs1:
>
> The Device Manager was also unable to see the SAN adapters
> Device Manager output
> /-------------------------------------------------------------------------- 
>
>
> ----\
> |                               Device Manager
>
>    |
> \-------------------------------------------------------------------------- 
>
>
> ----/
>
> Devices List                                          Configure the iSCSI
>   iSCSI Configuration                                 parameters.
>   Emulex 10G NIC: Bus:Dev:Func 09:0:0 -
>   E4:11:5B:62:80:8A
>   Emulex 10G NIC: Bus:Dev:Func 09:0:1 -
>   E4:11:5B:62:80:8C
>
> The various scenarios described in the document refer to i4 or i6 
> servers (this server is an i2).  The only scenario mentioned using i2 
> servers, was an example ("Use Case 2") whereby the customer was 
> attempting to replace i2 servers by i4 or i6.  The inference from this 
> is either that i2 servers don't need any such special steps, or that 
> i2 servers cannot boot from an MSA 2050 SAN using an B9F24AR  HBA.
>
> Customer opened a support call, and apparently the i2 is compatible, 
> but since the HBA can't be seen from the EFI environment, it must be a 
> hardware fault, despite the fact that once booted, VMS can see the 
> drives.
>
> Any suggestions/experiences/comments gratefully received.
>
> ---
> Tom Wade
> OpenVMS Consultant and Enthusiast
> tom dot wade at tomwade dot eu
> _______________________________________________
> Info-vax mailing list
> Info-vax at rbnsn.com
> http://rbnsn.com/mailman/listinfo/info-vax_rbnsn.com
>


-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.