[Info-vax] Viewing SSH users on VMS

[Arne Vajhøj]

On 7/27/2024 4:54 PM, Craig A. Berry wrote:
> On 7/27/24 12:34 PM, Chris Townley wrote:
>> On AXP ssh uses show as FT terminals, and the source can be seen, and 
>> accessed using the DVI code TT_ACCPORNAM. for example on AXP I see:
>>
>> $ sh u /f/i
>>        OpenVMS User Processes at 27-JUL-2024 18:24:48.74
>>      Total number of users = 2,  number of processes = 2
>>
>> Username  Process Name       PID     Terminal
>> SYSTEM    SYS_SYSTEM_01    0000012B  OPA0:
>> TOWNLEYC  CCT_TOWNLEYC_01  0000012A  FTA1:(ssh/merlin.fritz.box:50407)
>>
>> However on X86 TT_ACPORNAM is blank, and I can find no method of 
>> seeing where they come from. OK it is probably me as it is always 
>> local, so it is perhaps not that important. But I do like a challenge!
>>
>> Currently I just see:
>>
>> 1 $ sh u /f/i
>>        OpenVMS User Processes at 27-JUL-2024 18:29:41.86
>>      Total number of users = 2,  number of processes = 5
>>
>>   Username  Process Name      PID     Terminal
>>   SYSTEM    SYSTEM          00000431  OPA0:
>>   TOWNLEYC  FTA12_TOWNLEYC  0000044C  FTA12:
>>   TOWNLEYC  FTA13_TOWNLEYC  0000044E  FTA13:
>>   TOWNLEYC  FTA14_TOWNLEYC  00000450  FTA14:
>>   TOWNLEYC  TOWNLEYC        00000448  FTA11:
>>
>> Any ideas how I could get this information?
>>
> 
> I don't know, but I suspect the difference is OpenSSH versus the old
> TCP/IP services SSH rather than platform.

Seems very likely.

OpenSSH is *nix code, so it does not set that thing in the
original code.

VSI obvious can and probably should add it to the VMS port.

Arne