[Info-vax] Box drawing characters garbled on EISNER

[Arne Vajhøj]

On 9/17/2024 10:41 AM, David Meyer wrote:
> For the last several months when I try to use NOTES on EISNER, the box
> drawing characters are garbled (e.g. "▒2;H▒K▒5B▒11B▒4;H▒K").
> 
> I don't recall making any changes to my terminal emulator (PuTTY)
> settings. Does anyone have a clue on what I've got messed up?

Test file:

<CSI>2J
<CSI>01;01H
<ESC>(0
<CSI>01;01Hlqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
<CSI>10;01Hmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqj
<CSI>02;01Hx<CSI>03;01Hx<CSI>04;01Hx<CSI>05;01Hx<CSI>06;01Hx<CSI>07;01Hx<CSI>08;01Hx<CSI>09;01Hx
<CSI>02;40Hx<CSI>03;40Hx<CSI>04;40Hx<CSI>05;40Hx<CSI>06;40Hx<CSI>07;40Hx<CSI>08;40Hx<CSI>09;40Hx
<ESC>(B
<CSI>11;01H

(you will need to replace <CSI> with byte 155 and <ESC> with byte 27)

$ sh term
Terminal: _TNA3:      Device_Type: VT400_Series  Owner: ARNE
Remote Port Info: Host: ARNEPC5 Port: 56461

    Input:    9600     LFfill:  0      Width: 132      Parity: None
    Output:   9600     CRfill:  0      Page:   26

Terminal Characteristics:
    Interactive        Echo               Type_ahead         No Escape
    Hostsync           TTsync             Lowercase          Tab
    Wrap               Scope              No Remote          Eightbit
    Broadcast          No Readsync        No Form            Fulldup
    No Modem           No Local_echo      No Autobaud        Hangup
    No Brdcstmbx       No DMA             No Altypeahd       Set_speed
    No Commsync        Line Editing       Overstrike editing No Fallback
    No Dialup          No Secure server   No Disconnect      No Pasthru
    No Syspassword     No SIXEL Graphics  No Soft Characters No Printer Port
    Numeric Keypad     ANSI_CRT           No Regis           No Block_mode
    Advanced_video     Edit_mode          DEC_CRT            DEC_CRT2
    DEC_CRT3           DEC_CRT4           No DEC_CRT5        No Ansi_Color
    VMS Style Input    <CTRL-H> Backspace

I don't think I have anything special in mt Putty config.

Note that I do:

$ set terminal/dev=vt400

not:

$ set terminal/inq

at login.

Arne