[Info-vax] tcpip gateway question

Anton Shterenlikht mexas at bristol.ac.uk
Tue Sep 8 06:31:21 EDT 2009


I've a VMS cluster on a local 10.10.10.0/24 network.

I'm trying to set up one of the VMS nodes
to also sit on the University network 137.222.0.0/16.

So I used tcpip$config and configured the two interfaces as:

   1  -  WE0 Menu (EWA0: TwistedPair 100mbps)
   2  -  137.222.187.238/16  mech-cluster238       Configured,Active          

   3  -  WE1 Menu (EWB0: TwistedPair 100mbps)
   4  -  10.10.10.1/24       vav                   Configured,Active          
 

I added the default University gateway, 137.222.187.250, and
name servers 137.222.10.36 and 137.222.10.39 with tcpip$config
options
                 3  -  Routing               
                 4  -  BIND Resolver         

I've ssh server and client enabled on this node.

My problem is that I cannot even ping the gateway.

Does this look reasonable:

$ tcpip show route
  
                             DYNAMIC
  
Type           Destination                           Gateway
  
AN    0.0.0.0                               137.222.187.250
AN    10.10.10.0/24                         10.10.10.1
AH    10.10.10.1                            10.10.10.1
AH    127.0.0.1                             127.0.0.1
AN    137.222.0.0/16                        137.222.187.238
AH    137.222.187.238                       137.222.187.238
$ 
 

many thanks for any advice or a link to a relevant manual.

-- 
Anton Shterenlikht
Room 2.6, Queen's Building
Mech Eng Dept
Bristol University
University Walk, Bristol BS8 1TR, UK
Tel: +44 (0)117 331 5944
Fax: +44 (0)117 331 5924




More information about the Info-vax mailing list