[Info-vax] tcpip gateway question
John Santos
john.santos at post.harvard.edu
Tue Sep 8 07:36:48 EDT 2009
In article <mailman.10.1252405909.17612.info-vax_rbnsn.com at rbnsn.com>,
mexas at bristol.ac.uk says...>
> I've a VMS cluster on a local 10.10.10.0/24 network.
>
> I'm trying to set up one of the VMS nodes
> to also sit on the University network 137.222.0.0/16.
>
> So I used tcpip$config and configured the two interfaces as:
>
> 1 - WE0 Menu (EWA0: TwistedPair 100mbps)
> 2 - 137.222.187.238/16 mech-cluster238 Configured,Active
>
> 3 - WE1 Menu (EWB0: TwistedPair 100mbps)
> 4 - 10.10.10.1/24 vav Configured,Active
>
>
> I added the default University gateway, 137.222.187.250, and
> name servers 137.222.10.36 and 137.222.10.39 with tcpip$config
> options
> 3 - Routing
> 4 - BIND Resolver
>
> I've ssh server and client enabled on this node.
>
> My problem is that I cannot even ping the gateway.
>
> Does this look reasonable:
>
> $ tcpip show route
>
> DYNAMIC
>
> Type Destination Gateway
>
> AN 0.0.0.0 137.222.187.250
> AN 10.10.10.0/24 10.10.10.1
> AH 10.10.10.1 10.10.10.1
> AH 127.0.0.1 127.0.0.1
> AN 137.222.0.0/16 137.222.187.238
> AH 137.222.187.238 137.222.187.238
> $
>
>
> many thanks for any advice or a link to a relevant manual.
Your net mask is almost certainly wrong. No one has a class B on an
ethernet segment anymore! My guess is you can't see the name servers
because your VMS system is trying to send directly to them and it
needs to go through your router.
Can you ping the router (137.222.187.250) by address? If not,
your LAN might be subnetted to smaller than a /24 and you should
have a local router to get to the rest of it. But most likely,
your netmask should be 255.255.255.0 (/24). Ask your network
people...
--
John
More information about the Info-vax
mailing list