[Info-vax] DECNET node address is inconsistant

[John Reagan]

The address in SHOW NET/FULL comes from the SCSSYSTEMID.  You'll have to 
manually keep that parameter in sync with the executor address.

John

"GeorgeinVT" <gcrowle at gmail.com> wrote in message 
news:dda2f1b8-8342-489b-96f0-3592734f7db7 at f10g2000vbf.googlegroups.com...
> If I do a "$ show net" command - the output shows my DECNET node
> address is 1.170 if I go into NCP my exec node is 1.176.  Below is the
> output from a $SHOW NET/FULL ...
>
> Can someone suggest where I can look to align the two addresses?
>
> Thanks
>
> ------------------------------------------
> system>show net/full
>
> The following network services are available at this time:
>
> Product:  DECNET                Manufacturer:  Digital Equipment
> Corporation
> Node:  RUSTY                     Address(es):  1.170
> Network Type:  DNA IV           Interface(s):  net 0
>
>
> Node Volatile Characteristics as of 17-SEP-2009 09:05:01
>
> Executor node = 1.176 (RUSTY)
>
> Identification           = DECnet for OpenVMS AXP V7.3
> Management version       = V4.0.0
> Incoming timer           = 45
> Outgoing timer           = 60
> Incoming Proxy           = Enabled
> Outgoing Proxy           = Enabled
> NSP version              = V4.1.0
> Maximum links            = 32
> Delay factor             = 80