[Info-vax] Pagefile is not showing on 8.2 running on Alpha

[CY]

On 26 Aug, 09:14, Volker Halle <volker_ha... at hotmail.com> wrote:
> CY,
>
> the primary page and swap files are being opened and initialized for
> use by SYSINIT early during boot. When you boot the system, are there
> any error messages on the OPA0: console from SYSINIT ?
>
> You could also try booting with >>> B -fl 0,30000 this will generate
> debug output and you should see the %SYSINIT messages regarding
> PAGEFILE.SYS - you need to capture the console output via the serial
> line and some terminal emulator.
>
> Volker.

We thougt of that too, but the terminal wasn't (is now) logging output
to a file, so I cant get that info right now.

We have to schedule a reboot on the system to see what is happening,
and if done right (system shutdown and so on) the problem
might dissappear, as I mentioned erlyer the last reboot was accidently
done by stumbling on some cables and then the DSA0 wont
build up as it should, I did that manually later. I cant however see
that the pagefile could get skipped by that, at least not with
my understanding of the system. We did have disk, not a working shadow
but still booted on it so I thought it wouldnt  matter.

//CY