[Info-vax] VAXCluster vs. VMSCluster?

[AdeV]

Bob Koehler may or may not have intoned:
> In article <MPG.25b014e1927460699898fb at news.enta.net>, AdeV <spam at solutionengineers.com> writes:
> > 
> > The licence is called VMSCLUSTER, not VAXCLUSTER - is that, technically 
> > speaking, a different product?
> 
>    The product was called VAXCLUSTER prior to the port of VMS to Alpha.
>    Since then it has been called VMSCLUSTER, a more accurate name.
> 
>    Check your VAX-VMS license, and make sure it is set to
>    /include=nodename, where nodename is the VMSCLUSTER node name of the
>    MicroVAX.  This changes when you change the node's cluster node name,
>    such as by introducing it a cluster for the first time.
> 
>    If the VAX-VMS license didn't load because of the /include, the other
>    VMS product licenses may have a problem.

I used LICENSE MODIFY/INCLUDE=ASTVAX vmscluster to add in the "main" 
(simh) node, but not the new microvax node - now corrected. However, the 
VMSCLUSTER licence still won't load properly on either node.

On the MicroVAX:

  $ SHOW LICENSE/FULL VMSCLUSTER

  Active licenses on node MV0001:

  VMSCLUSTER
          Producer: DEC
          Units: 0
          Version: 0.0
          Release Date: (none)
          Termination Date: 12-JAN-2011
          Availability: 0
          Activity: 100

  $_

Exactly the same appears on the simh unit, except the node name is 
ASTVAX instead.

If I do LICENSE LIST/FULL VMSCLUSTER, I get this:

  License Management Facility  V1.2

  License Database File:       SYS$COMMON:[SYSEXE]LMF$LICENSE.LDB;1
  Created on:                   1-JAN-2010
  Created by user:             SYSTEM
  Created by LMF Version:      V1.2

  -----------------------------------
  Issuer:                      OPENVMS_HOBBYIST
  Authorization:               [cut]
  Product Name:                VMSCLUSTER
  Producer:                    DEC
  Units:                       0
  Version:                     0.0
  Release Date:                (none)
  PAK Termination Date:        12-JAN-2011
  Availability:                0
  Activity:                     000000100
  Options:
  Hardware ID:

  Revision Level:              6
  Status:                      Active
  Command:                     MODIFY
  Modified by user:            SYSTEM
  Modified on:                  7-JAN-2010 18:34:52.90
  Include:                     ASTVAX,MV0001
 
So, it all looks OK, as far as I can tell; it just won't work...


Also, periodically, I'm seeing this error on both consoles:

  %%%%%%%%%%%  OPCOM   7-JAN-2010 19:05:38.89  %%%%%%%%%%%
  Message from user SYSTEM on ASTVAX
  Event: Too Few Servers Detected from: Node LOCAL:.ASTVAX DTSS,
          at: 2010-01-07-19:05:38.890+00:00Iinf
          Number Detected=0, 
          Number Required=1
          eventUid   A4BD7AA0-FBBF-11DE-BA31-08002BAABBCC
          entityUid  9662F3A0-FBA0-11DE-8004-AA0004000104
          streamUid  947617C0-FBA0-11DE-8003-AA0004000104

The node name varies depending on which console generates the event.


If I try to login to either ASTVAX or MV0001 on any normal terminal (not 
the operator's console), it barfs with "No license is active for this 
software product).


-- 
Cheers!
Ade.