[Info-vax] Itanium Mgmnt Console IP address

[Richard Maher]

Shit, you're not giving too much away guys are ya? Look I know it's free
advice but some real commands with some real examples would really help
here. Where's Steven Schweda when you need him? Actual commands and actual
output?

Anyway, I don't have a serial cable (I thought those were some dodgy pin
arrangement that was as common as hen's teeth?) so I'll just stick with
separate subnets at the moment; that whole burn your bridges/boats thing
looks a bit scary, especially in the absence of an actual command/docs.

Thanks for the help anyway.

Cheers Richard Maher
"Bob Gezelter" <gezelter at rlgsc.com> wrote in message
news:99252755-19b8-4ed3-8ea3-10241a709c2b at 35g2000yqa.googlegroups.com...
On Jan 9, 4:27 am, "Martin Vorlaender" <m... at pdv-systeme.de> wrote:
> Richard Maher <maher... at hotspamnotmail.com> wrote:
> > "Martin Vorlaender" <m... at pdv-systeme.de> wrote in message
> >news:op.u581txqzdc3j58 at notemv-tap.mv.privat...
> >> Richard Maher <maher... at hotspamnotmail.com> wrote:
> >> > How does one change the IP address for the Management Console on one
of
> >> > these lovely Itanium boxes that has pretty recent formware?
>
> >> Easiest way is to connect to the serial console of the mgmt board.
> >> Login (default is Admin/Admin),
> >> choose "CM" (command mode),
> >> and then "LS" (LAN setup).
>
> > Yep I get LS (from the TCP/IP connection as opposed to serial) and I get
to
> > see all of the current settings including the current "IP Address". How
can
> > I change that value?
>
> Every setting is preceded by a letter. Enter that letter to get prompted
> for a change, or hit "A" to change all values, IIRC.
>
> > Do I *have* to use the serial connection thing?
>
> I'm suspicious of changing the IP address of the current connection,
> so I haven't tried it yet. Go ahead and do it. You can still fall back
> to the serial connection if you lose your IP connectivity permanently.
>
> cu,
> Martin
> --
> One OS to rule them all | Martin Vorlaender | OpenVMS rules!
> One OS to find them | work: m... at pdv-systeme.de
> One OS to bring them all | http://vms.pdv-systeme.de/users/martinv/
> And in the Darkness bind them.| home: martin.vorlaen... at t-online.de

Martin,

With all due respect, I must differ with your use of "permanently".

If the command works as expected, one's present connection will drop,
but the console will reappear at the new address. Of course, one must
make sure that the new address, subnet mask, and gateway are all
correct, else the node may become unreachable in the present network
context.

For those reasons, I do agree with the suggestion that this adjustment
be done when one has access to the serial console. When I anticipate
these possibilities, I connect the serial console to a serial
connection on a system that is already stable (e.g., a terminal server
on the management network) so that I have a way back if my network
access has a problem. Otherwise, it is frequently me and a laptop in
the machine room.

- Bob Gezelter, http://www.rlgsc.com