[Info-vax] Itanium Mgmnt Console IP address

[Martin Vorlaender]

> Shit, you're not giving too much away guys are ya? Look I know it's free
> advice but some real commands with some real examples would really help
> here. Where's Steven Schweda when you need him? Actual commands and actual
> output?

I'm very sorry, but I'm at home, and the Integrity system is at work.
So I have no option right now to enter a few commands and cut'n'paste the
output...

> Anyway, I don't have a serial cable (I thought those were some dodgy pin
> arrangement that was as common as hen's teeth?) so I'll just stick with
> separate subnets at the moment; that whole burn your bridges/boats thing
> looks a bit scary, especially in the absence of an actual command/docs.

Speaking of missing information, care to share exactly *which* model of
Integrity we're talking about here?

And speaking of documentation, googling a bit after "rx2600 management
processor site:hp.com -site:itrc.hp.com" finds

"HP Integrity and HP 9000: iLO MP Operations Guide"
http://docs.hp.com/en/5991-6006/index.html

This doesn't have any information about changing the MP IP "on the fly",
i.e. when being connected via Telnet. The only options to set up the MP
IP described there are
- DHCP and DDNS
- ARP Ping
- via the console serial port
- via the web GUI

cu,
   Martin
-- 
One OS to rule them all       | Martin Vorlaender  |  OpenVMS rules!
One OS to find them           | work: mv at pdv-systeme.de
One OS to bring them all      |   http://vms.pdv-systeme.de/users/martinv/
And in the Darkness bind them.| home: martin.vorlaender at t-online.de