[Info-vax] no master member found for this virtual unit (again)

[tothestarsby2100]

On Feb 9, 10:33 am, RLFitch <rlfi... at gmail.com> wrote:
> While trying to mount a shadow set, I have encountered the problem:
> 'no master member found for this virtual unit'.
>
> Doing some COV group research, I've found the following instructions
> (circa 2000):
>
> ------------------------------
> $ MC SYSGEN
> set alloclass 3        ! or any value that strikes your fancy
> write current
> exit
>
> with a similar change in sys$system:modparams.dat
> then reboot
> ------------------------------
>
> I already have ALLOCLASS set to 1 (sysgen and modparams).
>
> Will setting it to 3 have any effect on other shadow sets that are
> mounted?
>
> I have:
> MOUNT /system DSA1:  /SHAD=( $1$DKB400:,$1$DKB500:) dk4
> Should that be changed to:
> MOUNT /system DSA1:  /SHAD=( $3$DKB400:,$3$DKB500:) dk4
>
> This is on OpenVMS 7.3-1.
>
> Thank you for your help,
> Ransom Fitch

 What do you have in SYSGEN for the Shadowing parameter?
You can leave the alloclass as is.