[Info-vax] Migrated VMS 5.X to simh - TCPWare error

[gregor.oelze]

On 17 Feb., 23:06, pe... at langstoeger.at (Peter 'EPLAN' LANGSTOeGER)
wrote:
> In article <b23b0674-e32e-4a69-ae12-5daaa0e34... at n1g2000yqm.googlegroups.com>, "gregor.oelze" <gregor.oe... at gmail.com> writes:
>
> >%STARTNET-F-ERROR, error during execution (NETCU START/IP SVA-0
> >192.9.201.130 /FLAGS=NOTRAILERS)
> >-STARTNET-I-SHUTNET, shutting down TCPware ...
>
> So, TCPware thinks of "SVA-0" (a DESVA, ESA0:)
>
> >set xq enabled
> >set xq type=DEQNA
> >set xq mac=00-4f-49-03-1a-93
>
> and SIHM is told to offer "QNA-0" (a DEQNA, EQA0:)
>
> This doesn't match.
>
> So either SIMH is able to offer a DESVA (don't know SIMH enough to answer
> this - but I'm pretty sure), or you need to reconfigure TCPware to fit to
> the hardware (in TCPWARE:TCPWARE_CONFIGURE.COM replace "SVA-0" with "QNA-0")
>
> HIH
>
> --
> Peter "EPLAN" LANGSTÖGER
> Network and OpenVMS system specialist
> E-mail  Pe... at LANGSTOeGER.at
> A-1030 VIENNA  AUSTRIA              I'm not a pessimist, I'm a realist

thanks for all the response: Here is a quick heads-up:

After searching through the file-system, i couldnt find a local
location, called TCPWARE,
what i did find- was SYS$SYSROOT[TCPIP]TCPIP_CONFIGURE.COM in which
the
old NIC was defined with SVA-0.

After a long fight with the vms editor and the Gold-Key i managed to
change the
NIC name to QNA-0. So - shutdown - restart of the machine-that is now
the output.

%STARTNET-F-ERROR, error during execution (NETCU START/IP QNA-0
192.9.201.130
/FLAGS=NOTRAILERS)

-STARTNET-I-SHUTNET, shutting down TCPware ...
%SET-I-INTSET, login interactive limit = 64, current interactive value
= 0
  18-FEB-2011 15:20:51
  SYSTEM       job terminated at 18-FEB-2011 15:20:53.75

I am still confused. Will it be the problem with the SYS$DEVICE?

Best regards

Gregor Oelze