[Info-vax] V/I64 R/W USB mass storage boot support?
Rod
rregier at dymaxion.ca
Fri Nov 4 10:49:49 EDT 2011
Just to re-cap, USB boot of a clone of the bootable DVD works fine.
\\
It looks like the boot or shutdown gets into intermittent trouble as
soon as OpenVMS
tries to *write* to the boot USB device.
\\
Loading.: USB MS
Starting: USB MS
%VMS_LOADER-I-Memorydisk allocated at:0x0000000100000000
............................................................................................................................................
%VMS_LOADER-W-Conin device path cannot be set to multiple devices
%VMS_LOADER-I-Select Console Device Paths from the Boot Manager Menu.
SYSBOOT> set startup_p1 "min"
SYSBOOT> set startup_p2 "CCC"
SYSBOOT> continue
HP OpenVMS Industry Standard 64 Operating System, Version V8.4
© Copyright 1976-2010 Hewlett-Packard Development Company, L.P.
%DECnet-I-LOADED, network base image loaded, version = 05.17.00
%STDRV-I-STARTUP, OpenVMS startup begun at 3-NOV-2011 16:53:35.78
%STDRV-I-OPENCOMP, opening component file 0, STARTUP$STARTUP_VMS
%STDRV-I-STRTPHAS, starting phase INITIAL at 3-NOV-2011 16:53:39.28
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$INITIAL-050_VMS.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$INITIAL-050_LIB.COM
%STDRV-I-CALLED, ignoring VMS$INITIAL-050_CONFIGURE.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_CSP.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_SHADOW_SERVER.COM
%STDRV-I-STRTPHAS, starting phase DEVICES at 3-NOV-2011 16:54:14.05
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$DEVICE_STARTUP.COM
%RUN-S-PROC_ID, identification of created process is 00000404
%STDRV-I-STRTPHAS, starting phase PRECONFIG at 3-NOV-2011 16:54:20.20
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:IPC$STARTUP.COM
%STDRV-I-STRTPHAS, starting phase CONFIG at 3-NOV-2011 16:54:20.48
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_VMS.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_ERRFMT.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_CACHE_SERVER.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_OPCOM.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_AUDIT_SERVER.COM
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.71 %%%%%%%%%%%
Operator _DYMIT$OPA0: has been enabled, username SYSTEM
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.71 %%%%%%%%%%%
Operator status for operator _DYMIT$OPA0:
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER,
SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8,
OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Logfile has been initialized by operator _DYMIT$OPA0:
Logfile is DYMIT::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;13
%SYSTEM-W-NOSECAUD, minimum system startup, security auditing disabled
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Operator status for operator DYMIT::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;
13
CENTRAL, PRINTER, TAPES, DISKS, DEVICES, CARDS, NETWORK, CLUSTER,
SECURITY,
LICENSE, OPER1, OPER2, OPER3, OPER4, OPER5, OPER6, OPER7, OPER8,
OPER9, OPER10,
OPER11, OPER12
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Find a driver for DeviceClass/DeviceSubClass = 0x9/0x0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_JOBCTL.COM
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Configured device UCM0 using driver SYS$HUBDRIVER:
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_LMF.COM
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Find a driver for DeviceClass/DeviceSubClass = 0x0/0x0
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Find a driver for InterfaceClass/InterfaceSubClass/Protocol =
0x3/0x1/0x1
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
hub_configure_device Unable to find Interface Driver
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Find a driver for InterfaceClass/InterfaceSubClass/Protocol =
0x3/0x1/0x2
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
hub_configure_device Unable to find Interface Driver
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Find a driver for DeviceClass/DeviceSubClass = 0x0/0x0
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Find a driver for InterfaceClass/InterfaceSubClass/Protocol =
0x8/0x6/0x50
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:21.77 %%%%%%%%%%%
Message from user HUBDRIVER on DYMIT
Configured device DNA0 using driver SYS$DNDRIVER:
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_SECURITY_SERVER.COM
%SYSTEM-W-NOSECSRV, minimum system startup, security server not
started
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_ACME_SERVER.COM
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:27.92 %%%%%%%%%%%
Message from user SYSTEM on DYMIT
%ACME-I-SERVERSTART, ACME_SERVER starting
%STDRV-I-STRTPHAS, starting phase BASEENVIRON at 3-NOV-2011
16:54:35.34
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$BASEENVIRON-050_VMS.COM
%%%%%%%%%%% OPCOM 3-NOV-2011 16:54:35.78 %%%%%%%%%%%
Message from user SYSTEM on DYMIT
TDF-I-SETTDF TDF set new timezone differential
NET$STARTUP, Network not started due to MINIMUM boot
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$BASEENVIRON-050_SMISERVER.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$BASEENVIRON-050_LIB.COM
%STDRV-I-DIRECT, @SYS$STARTUP:DECDTM$STARTUP.COM
%STDRV-I-DIRECT, stdrv$foreign ! Execute LICENSE_CHECK.EXE
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$BASEENVIRON-050_INDICT_SERVER.COM
%STDRV-I-STRTPHAS, starting phase LPBEGIN at 3-NOV-2011 16:54:37.09
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$LPBEGIN-050_STARTUP.COM
%SET-I-INTSET, login interactive limit = 8, current interactive value
= 0
3-NOV-2011 16:54:37
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$LPBEGIN-050_SMHANDLER.COM
%STDRV-I-STRTPHAS, starting phase LPMAIN at 3-NOV-2011 16:54:37.53
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-EMTYPHAS, phase LPMAIN has no entries in file 0.
%STDRV-I-STRTPHAS, starting phase LPBETA at 3-NOV-2011 16:54:37.71
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-EMTYPHAS, phase LPBETA has no entries in file 0.
%STDRV-I-STRTPHAS, starting phase END at 3-NOV-2011 16:54:37.89
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$END-050_COORDINATED.COM
%SYSTEM-W-NOREGSRV, minimum system startup, Coordinated Startup not
performed
%STDRV-I-DRVEND, startup finished at 3-NOV-2011 16:54:38.19
SYSTEM job terminated at 3-NOV-2011 16:54:38.26
Accounting information:
Buffered I/O count: 2834 Peak working set
size: 10288
Direct I/O count: 1015 Peak virtual
size: 258128
Page faults: 3965 Mounted
volumes: 0
Charged CPU time: 0 00:00:00.52 Elapsed time: 0
00:01:04.17
Username: system
Password:
HP OpenVMS Industry Standard 64 Operating System, Version V8.4
Last interactive login on Wednesday, 2-NOV-2011 17:54:14.07
Last non-interactive login on Tuesday, 25-OCT-2011 17:03:15.93
$ sho log sys$sysdevice:
%SHOW-S-NOTRAN, no translation for logical name SYS$SYSDEVICE:
$
$ sho log sys$sysdevice:
"SYS$SYSDEVICE" = "DYMIT$DNA0:" (LNM$SYSTEM_TABLE)
$ @detached_shutdown
%RUN-S-PROC_ID, identification of created process is 00000411
$
SHUTDOWN message on DYMIT from user SYSTEM at DYMIT Batch 16:55:59
DYMIT will shut down in 0 minutes; back up LATER. Please log off node
DYMIT.
REBOOT
$ lo
SYSTEM logged out at 3-NOV-2011 16:56:02.45
%%%%%%%%%%% OPCOM 3-NOV-2011 16:56:07.03 %%%%%%%%%%%
Message from user SYSTEM on DYMIT
%ACME-I-SERVEREXIT, ACME_SERVER exiting
%%%%%%%%%%% OPCOM 3-NOV-2011 16:56:08.99 %%%%%%%%%%%
Message from user SYSTEM on DYMIT
SHUTTING_DOWN, DYMIT shutdown was requested by the operator.
**** Error writing 2 blocks, buffer = FFFFFFFF.881B2E00, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write header, dump will probably be unusable ****
**** Error writing 2 blocks, buffer = FFFFFFFF.881B4600, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write trap info blocks ****
**** Error writing 2 blocks, buffer = FFFFFFFF.881B4200, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write crash error log entry, dump may be unusable ****
**** Error writing 112 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 112 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 72 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** SYS$ERRLOG.DMP is too small to save all error log buffers
**** Primary HALTED with code HWRPB_HALT$K_WARM_REBOOT
\\
Loading.: USB MS
Starting: USB MS
%VMS_LOADER-I-Memorydisk allocated at:0x0000000100000000
............................................................................................................................................
%VMS_LOADER-W-Conin device path cannot be set to multiple devices
%VMS_LOADER-I-Select Console Device Paths from the Boot Manager Menu.
SYSBOOT> set startup_p1 ""
SYSBOOT> set startup_p2 "CCC"
SYSBOOT> continue
HP OpenVMS Industry Standard 64 Operating System, Version V8.4
© Copyright 1976-2010 Hewlett-Packard Development Company, L.P.
%DECnet-I-LOADED, network base image loaded, version = 05.17.00
%STDRV-I-STARTUP, OpenVMS startup begun at 3-NOV-2011 17:01:07.71
%STDRV-I-OPENCOMP, opening component file 0, STARTUP$STARTUP_VMS
%STDRV-I-OPENCOMP, opening component file 1, STARTUP$STARTUP_LAYERED
%STDRV-I-STRTPHAS, starting phase INITIAL at 3-NOV-2011 17:01:11.33
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$INITIAL-050_VMS.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$INITIAL-050_LIB.COM
%STDRV-I-CALLED, ignoring VMS$INITIAL-050_CONFIGURE.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_CSP.COM
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$CONFIG-050_SHADOW_SERVER.COM
%STDRV-I-INDXFILE, using component file 1
%STDRV-I-EMTYPHAS, phase INITIAL has no entries in file 1.
%STDRV-I-STRTPHAS, starting phase DEVICES at 3-NOV-2011 17:01:46.15
%STDRV-I-INDXFILE, using component file 0
%STDRV-I-DIRECT, @SYS$STARTUP:VMS$DEVICE_STARTUP.COM
%EIA0, Auto-negotiation mode assumed set by console
%EIA0, Auto-negotiation started, advertising 100BaseTX Full Duplex,
Flow Control
%EWA0, Auto-negotiation mode assumed set by console
%EWA0, BCM5701 located in 64-bit, 66-mhz PCI slot
%EWA0, Device type is BCM5701C (UTP) Rev B5 (01050000)
%EIA0, Full Duplex 100BaseTX connection selected, TX flow control
%EWA0, Link up: 1000 mbit, full duplex, flow control disabled
%PKC0, Copyright (c) 1998 LSI Logic PKW V3.2.20 ROM 4.19
%PKC0, SCSI Chip is SYM53C1010/66, Operating mode is LVD Ultra3 SCSI
%PKD0, Copyright (c) 1998 LSI Logic PKW V3.2.20 ROM 4.19
%PKD0, SCSI Chip is SYM53C1010/66, Operating mode is LVD Ultra3 SCSI
%RUN-S-PROC_ID, identification of created process is 00000404
%RUN-S-PROC_ID, identification of created process is 00000405
%RUN-S-PROC_ID, identification of created process is 00000406
%SYSTEM-I-MOUNTVER, DYMIT$DNA0: is offline. Mount verification in
progress.
Interrupt Priority C
Commands:
C device Cancel Mount Verification
Q Adjust Quorum
CTRL-P Prompt for Crash
CTRL-Z Exit IPC
IPC> C DNA0
IPC> ^Z
%SYSTEM-I-MOUNTVER, DYMIT$DNA0: has aborted mount verification.
Interrupt Priority C
Commands:
C device Cancel Mount Verification
Q Adjust Quorum
CTRL-P Prompt for Crash
CTRL-Z Exit IPC
IPC> ^P
Crash (y/n): y
Starting Crash...
**** OpenVMS I64 Operating System V8.4 - BUGCHECK ****
** Bugcheck code = 0000064C: OPERCRASH, Operator forced system crash
** Crash CPU: 00000000 Primary CPU: 00000000 Node Name: DYMIT
** Highest CPU number: 00000000
** Active CPUs: 00000000.00000001
** Current Process: STARTUP
** Current PSB ID: 00000001
** Image Name: DYMIT$DNA0:[SYS0.SYSCOMMON.]
[SYSEXE]DELETE.EXE
**** Error writing 2 blocks, buffer = FFFFFFFF.881B2E00, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write header, dump will probably be unusable ****
**** Error writing 2 blocks, buffer = FFFFFFFF.881B4600, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write trap info blocks ****
**** Error writing 2 blocks, buffer = FFFFFFFF.881B4200, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write crash error log entry, dump may be unusable ****
**** Error writing 112 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 112 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 72 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** SYS$ERRLOG.DMP is too small to save all error log buffers
**** Error writing 2 blocks, buffer = FFFFFFFF.881B2E00, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write header, dump will probably be unusable ****
**** Error writing 2 blocks, buffer = FFFFFFFF.881B4600, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write trap info blocks ****
**** Error writing 2 blocks, buffer = FFFFFFFF.881B4200, VBN 1
Status = 00000054, 00000000 (Section = Header block)
**** Unable to write crash error log entry, dump may be unusable ****
**** Error writing 112 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 112 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 72 blocks, buffer = FFFFFFFF.92396000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 2 blocks, buffer = FFFFFFFF.881B2E00, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 127 blocks, buffer = FFFFFFFF.9239E000, VBN 1608123
Status = 00000054, 00000000 (Section = Error logs)
**** Starting compressed selective memory dump at 3-NOV-2011 17:13...
**** Error writing 127 blocks, buffer = FFFFFFFF.9239E000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 127 blocks, buffer = FFFFFFFF.9239E000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
.
**** Error writing 127 blocks, buffer = FFFFFFFF.9239E000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 127 blocks, buffer = FFFFFFFF.9239E000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 10 blocks, buffer = FFFFFFFF.9239E000, VBN 1
Status = 00000054, 00000000 (Section = Error logs)
**** Error writing 1 blocks, buffer = FFFFFFFF.881B3200, VBN 1
Status = 00000054, 00000000 (Section = Memory)
**** Read/write error reporting suppressed.
**** Unable to rewrite header, dump may be unusable ****
**** Memory dump complete - not all key processes or global pages
saved
**** Primary HALTED with code HWRPB_HALT$K_WARM_REBOOT
1 0 0x0000A4 0x0000000000000000 start memory discovery
1 0 0x000081 0x0000000000000000 start I/O discovery
More information about the Info-vax
mailing list