[Info-vax] FTP/SSL from OpenVMS (client) to Unix Filezilla (server) failure

[gopalakrishnan]

Thank you for the message Steven

Tried that too and it does not work either

There sure is a difference: when I do "set passive on" OpenVMS FTP command, it does not send a port command after I enter the "dir" command. It sends a PASV command instead ....as expected???

Below is the console log:

220-Welcome to the Xxxx SFTP service.
220-
220-Use of this service is subject to the security and acceptable use policies
220-of Xxxx; copies of these documents can be obtained from
220 security at xxxx.co.nz for approved usage by Xxxx clientelle.
Connected to SFTP.XXXX.CO.NZ. 
234 Using authentication type TLS
200 PBSZ=0
200 Protection level set to P
331 Password required for z
230 Logged on

FTP> enable log
Bell off.
Debugging on (debug=1).

FTP> set passive on
Passive is ON.

FTP> cd /upload
--->  CWD /upload
250 CWD successful. "/upload" is current directory.

FTP> dir
--->  PASV
227 Entering Passive Mode (117,120,34,121,19,145)
%TCPIP-E-FTP_NETERR, I/O error on network device
-SYSTEM-F-TIMEOUT, device timeout
%TCPIP-E-FTP_DATACONF, cannot establish data connection with remote host
-SYSTEM-F-TIMEOUT, device timeout