[Info-vax] W: VMS Alpha V7.2 for Multia/UDB installation media

[MG]

On 29-1-2012 14:31, glen herrmannsfeldt wrote:
> It used to be that there was a drive select jumper on the drives,
> with numbers like 1, 2, 3, 4, or sometimes 0, 1, 2, 3.
>
> Since PC drives use the cable twist to move the select line, some
> might not even have the jumper. It will then appear as the second
> drive.
>
> There is also inconsistent use of pin 2 and pin 34 between drives,
> which could cause problems.

Thank you for your clarification, I see.  Unfortunately, the drive
in question has no jumpers.  So, I'll have to find an alternative
solution.

I'm tempted to connect two CD-ROM drives and place the floppy
diskette data simply onto a CD.  Or, find a (compatible?) SCSI
floppy diskette drive.

Any (other) ideas are, needless to say, more than welcome.

  - MG