[Info-vax] wwidmgr on DS10

[Bart Zorn]

On Sunday, December 29, 2013 8:43:37 PM UTC+1, Jerome Ibanes wrote:
> Folks,
> 
> 
> 
> I'm trying to have an alphaserver DS10 boot from the SAN, while the 
> 
> procedure worked with the ES47, I can't seem to be able to make it work 
> 
> on the DS10, as such:
> 
> 
> 
> 1280 Meg of system memory
> 
> probing hose 0, PCI
> 
> probing PCI-to-ISA bridge, bus 1
> 
> bus 0, slot 9 -- ewa -- DE500-BA Network Controller
> 
> bus 0, slot 11 -- ewb -- DE500-BA Network Controller
> 
> bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE
> 
> bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE
> 
> bus 0, slot 14 -- vga -- ELSA GLoria Synergy
> 
> bus 0, slot 15, function 0 -- pka -- Adaptec AIC-7899
> 
> bus 0, slot 15, function 1 -- pkb -- Adaptec AIC-7899
> 
> bus 0, slot 16 -- pga -- FCA-2384
> 
> initializing GCT/FRU at 3ff40000
> 
> Testing the System
> 
> Testing ew* devices.
> 
> System Temperature is 38 degrees C
> 
> 
> 
> AlphaServer DS10 466 MHz Console V7.3-1, Feb 27 2007 13:17:58
> 
> >>>wwidmgr -show adapter
> 
> item    adapter                   WWN                  Cur. Topo  Next 
> 
> Topo 
> 
> [ 0] pga0.0.0.16.0        2000-0000-c945-350e            FABRIC     
> 
> FABRIC     
> 
> [9999] All of the above.
> 
> >>>show dev pga
> 
> pga0.0.0.16.0              PGA0        WWN 1000-0000-c945-350e
> 
> >>>wwidmgr -show wwid -full
> 
> 
> 
> pga0.0.0.16.0
> 
> - Port: 1000-0000-c945-350e   
> 
> 
> 
> pga0.0.0.16.0
> 
> - Port: 200a-0005-1e02-0100   
> 
> 
> 
> pga0.0.0.16.0
> 
> - Port: 21fc-0005-1e02-0100   
> 
> 
> 
> pga0.0.0.16.0
> 
> - Port: 500a-0981-85e5-2a4b  
> 
> >>>wwidmgr -show wwid      
> 
> >>>
> 
> 
> 
> The Fabric switch is configured properly, and this same process works 
> 
> well on the ES47, yet, not on the DS10 while running firmware 7.3-1.
> 
> 
> 
> Does anyone has suggestions on how to make this work?
> 
> 
> 
> 
> 
> Thanks,
> 
> Jerome

Did you configure the boot disk with "wwidmgr -set" or "wwidmgr -quickset"?
If not, I suggest you read the wwidmgr manual how to do it.

HTH,

Bart