[Info-vax] wwidmgr on DS10

[Jerome Ibanes]

Folks,

I'm trying to have an alphaserver DS10 boot from the SAN, while the 
procedure worked with the ES47, I can't seem to be able to make it work 
on the DS10, as such:

1280 Meg of system memory
probing hose 0, PCI
probing PCI-to-ISA bridge, bus 1
bus 0, slot 9 -- ewa -- DE500-BA Network Controller
bus 0, slot 11 -- ewb -- DE500-BA Network Controller
bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE
bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE
bus 0, slot 14 -- vga -- ELSA GLoria Synergy
bus 0, slot 15, function 0 -- pka -- Adaptec AIC-7899
bus 0, slot 15, function 1 -- pkb -- Adaptec AIC-7899
bus 0, slot 16 -- pga -- FCA-2384
initializing GCT/FRU at 3ff40000
Testing the System
Testing ew* devices.
System Temperature is 38 degrees C

AlphaServer DS10 466 MHz Console V7.3-1, Feb 27 2007 13:17:58
>>>wwidmgr -show adapter
item    adapter                   WWN                  Cur. Topo  Next 
Topo 
[ 0] pga0.0.0.16.0        2000-0000-c945-350e            FABRIC     
FABRIC     
[9999] All of the above.
>>>show dev pga
pga0.0.0.16.0              PGA0        WWN 1000-0000-c945-350e
>>>wwidmgr -show wwid -full

pga0.0.0.16.0
- Port: 1000-0000-c945-350e   

pga0.0.0.16.0
- Port: 200a-0005-1e02-0100   

pga0.0.0.16.0
- Port: 21fc-0005-1e02-0100   

pga0.0.0.16.0
- Port: 500a-0981-85e5-2a4b  
>>>wwidmgr -show wwid      
>>>

The Fabric switch is configured properly, and this same process works 
well on the ES47, yet, not on the DS10 while running firmware 7.3-1.

Does anyone has suggestions on how to make this work?


Thanks,
Jerome