[Info-vax] DNFS1ACP using 100% of CPU

[Sum1]

On 2013-10-16 11:27:51 +0000, Volker Halle said:

> What is your Switch port set to ? If it's a non-managed Switch, 
> consider setting your EWA Interface to AUTO as well. Autonegotiation on 
> OpenVMS works fine since at least V7.3-2 !
> 
> Also check for LAN Driver Messages with MC LANCP SHOW DEV/INTERN EWA
> 
> Volker.

It is unmanaged.  All I read is about never setting AUTO as either VMS 
and/or the card were bad at it :(

LANCP> sho dev/intern ewa0

X Device Internal Counters EWA0 (16-OCT-2013 23:42:32.56):
                  Value  Counter
                  -----  -------
                         --- Internal Driver Counters ---
                    127  Driver version (X-n)
               00400200  Driver flags <FdxEna, FdxOper>
               00001080  Device type <DC21143, DE500BA>
                 LinkUp  Link status
                      3  Link transition count
                      4  Tulip reset count
                      8  Setup buffers issued
                      6  CSR6 changes
                   4668  Transmit multiple addresses
                 139783  Device interrupts
                      1  Soft errors
                     73  Duplex mode mismatches
                    Off  Auto-negotiation state
                    Off  Autosense state
                    100  Saved speed setting
             0:00:03.00  Transmit time limit
             0:00:01.00  Timer routine interval
               F8660004  Most recent CSR5 contents <31, 30, 29, 28, TS2, TS1,
                         RS1, RS0, TU>
               03ACE202  Most recent CSR6 contents <MBO, SCR, PCS, SF, HBD, PS,
                         TR1, TR0, ST, FD, SR>
               F8660004  Most recent CSR5 error contents <31, 30, 29, 28, TS2,
                         TS1, RS1, RS0, TU>
               000000C4  Most recent CSR12 error contents <7, 6, LS10>
               00050008  Most recent CSR15 contents
             0:55:17.34  Current time (EXE$GL_ABSTIM_TICS)
             0:18:26.52  Last duplex mode mismatch reported
                         --- Fork Delay (after scheduled) ---
                 139584  < 10 milliseconds
                     20  10..19 milliseconds
                         --- Lost Packets after Fork Delay ---
                         --- DMA Window ---
                         --- Driver Messages ---
16-OCT-2013 23:05:41.59  Possible duplex mode mismatch condition detected
16-OCT-2013 22:49:05.99  Link state: UP
16-OCT-2013 22:49:03.21  Full Duplex 100baseTX connection selected
16-OCT-2013 22:47:22.78  Link state: UP
16-OCT-2013 22:47:19.79  FastFD mode set by console

OK, possible duplex mismatch, except the SRM, card and LANCP all agree 
that it is FD….?