[Info-vax] rx2800i2 sales/support window changes

[Johnny Billquist]

On 2014-02-14 05:29, JF Mezei wrote:
> On 14-02-13 22:10, Johnny Billquist wrote:
>
>> Uh. Manufacturing new boards is something that can be done on demand
>> without much of any extra cost. You send the manufacturing file to a
>> board manufacturer, who feeds it into the machine, and the machine spits
>> out a bunch of boards.
>
>
> Does that include populating the board with components ? That would
> require robot programming, (or training chinese workers)

Placement machines already exist, and they do not need any programming 
beyond providing the robots with the placement files. All standard 
stuff, and done all the time. They do not need any extensive adaption. 
All components apart from possibly a few connectors comes very 
standardized. But even the connectors nowadays are probably just a 
standard set for the most part. Noone really do anything that stands out 
these days.

	Johnny

-- 
Johnny Billquist                  || "I'm on a bus
                                   ||  on a psychedelic trip
email: bqt at softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol