[Info-vax] make a FSL for AlphaDS10 on a PC

[carlier.damien at gmail.com]

Hello,

Il have my Alphaserver DS10 broken down, the SRM look HS. I would like to use the FailSafe Loader Metode with a boot disk but i have a problem

I have recovered mkboot.exe and the firmware DS10_v7_3.exe, and tries to make an image. But this is impossible because the firmware file is larger than 1.44MB.

What is the actual procedure to use it ?



Note i use this metode found in http://lab.nethence.com/elge/hardware.computing/DEC/RAID%20Array%20230%2B/ucr_na-CYBALPHA_FIRMWARE_UPDATE_V61_032002.pdf-1.pdf:
 
Bootable Floppy Using a PC Running WNT
   1. Locate the console firmware from either the latest Firmware Update CD or
      access it from out Cybrary site or over the web at one of the following  
      locations.  
http://Cybrary.inet.cpqcorp.net/DOWNLOAD/FIRMWARE/SYSTEMS/ALPHA/
 Cybrary Online
CDs  
http://ftp.digital.com/pub/Digital/Alpha/firmware/
 Alpha Firmware Internet Readme  
http://ftp.digital.com/pub/DEC/Alpha/firmware/
 Alpha Firmware Internet Readme  
   2. Copy the firmware to your system.  
   3. Locate mkboot.exe  and put it on the disk (C: in this example)  
   4. Copy the firmware to the same drive as mkboot and rename it to fwupdate.exe  
416
   5. Pull up a MSDOS window and use these two files to create bootable FSL floppy
      using the following procedure:  
     Insert writeable FAT formatted floppy  
     C:
\mkboot fwupdate.exe
     Bad command or file name  
     mkboot V1.1: create a bootable floppy  
     Please insert a formatted diskette into drive A: and press and key:
<CR>
     Number of sectors per track for this disk is 18  
     Writing image to drive A:.  Press ^C to abort.  
     Track: 45   Head:   0  Sector:  16  
     Done.
   6. Insert the floppy in the drive with the failsafe loader jumper enabled and
      power up. You should now get to the UPD> prompt. 

Best Regard
D