[Info-vax] unzip.exe and cc064.zip

Sat Oct 8 13:03:55 EDT 2016

<ergamenes at gmail.com> wrote in message 
news:6d546700-5418-450c-b23b-3eaa7672e481 at googlegroups.com...
> On Friday, 7 October 2016 21:13:37 UTC+1, Bill Cunningham  wrote:
>
>> Some new info began scrolling on the screen. About tesfiles and updates 
>> were
>> shown. But this is the memory allocation as of now.
>
> There should be a file called sys$system:agen$params.report which 
> documents the changes AUTOGEN has made to your system. If you can get a 
> log of that and search for the sections relevant to GBLPAGES that would be 
> useful information.

Logging to file "log"
sim> c
 sys$system:agen$params.report
AUTOGEN Parameter Calculation Report on node: Nodename is Unknown
  This information was generated at  7-OCT-2016 16:02:28.04
  AUTOGEN was run from GETDATA to REBOOT - default execution specified

Processing Parameter Data files
-------------------------------

Including parameters from: SYS$SYSTEM:MODPARAMS.DAT

** WARNING ** - The system was up for less than 24 hours (uptime = 0 hrs)
   when the feedback information was recorded. This could result in feedback
   information that does not accurately reflect your typical workload.

** ERROR ** - Errors were detected with the FEEDBACK data.
 The ending phase is being changed to "TESTFILES" so that no
 modifications will take place without you first being able to
 review the results of feedback as reported in
 SYS$SYSTEM:AGEN$PARAMS.REPORT. If the results are OK, re-invoke
 AUTOGEN as follows:
  @SYS$UPDATE:AUTOGEN GENPARAMS REBOOT FEEDBACK
 If the results are NOT OK, you may wish to invoke AUTOGEN
 without using the feedback mechanism as follows:
 @SYS$UPDATE:AUTOGEN GETDATA REBOOT NOFEEDBACK

Feedback information was collected on  7-OCT-2016 16:00:22.89
  Old values below are the parameter values at the time of collection.
  The feedback data is based on 0 hours of up time.
  Feedback information will be used in the subsequent calculations

Parameter information follows:
------------------------------

MAXPROCESSCNT parameter information:
 Feedback information.
    Old value was 300, New value is 240
    Maximum Observed Processes: 13

 Terminal phase is TESTFILES -- VMSIMAGES.TMP created,
 but will not supersede older version of VMSIMAGES.DAT.

Information on VMS executable image Processing:

 Processing SYS$MANAGER:VMS$IMAGES_MASTER.DAT

GBLPAGES parameter information:
 Feedback information.
    Old value was 14600, New value is 28400
    Peak used GBLPAGES: 14490
    Global buffer requirements: 1024
 Override Information - parameter calculation has been overridden.
    The calculated value was 18400.  The new value is 28400.
    GBLPAGES has been increased by 10000.

GBLSECTIONS parameter information:
 Feedback information.
    Old value was 280, New value is 260
    Peak used GBLSECTIONS: 213

LOCKIDTBL parameter information:
 Feedback information.
    Old value was 1792, New value is 1792
    Current number of locks: 70
    Peak number of locks: 1792

LOCKIDTBL_MAX parameter information:
 Feedback information.
    Old value was 83040, New value is 16776959

RESHASHTBL parameter information:
 Feedback information.
    Old value was 2048, New value is 64
    Current number of resources: 70

MSCP_BUFFER parameter information:
 Feedback information.
    Old value was 128, New value is 128
    MSCP server I/O rate: 0 I/Os per 10 sec.
    I/Os that waited for buffer space: 0
    I/Os that fragmented into multiple transfers: 0

SCSCONNCNT parameter information:
 Feedback information.
    Old value was 5, New value is 5
    Peak number of nodes: 1
    Number of CDT allocation failures: 0

SCSRESPCNT parameter information:
 Feedback information.
    Old value was 300, New value is 300
    RDT stall count: 0

SCSBUFFCNT parameter information:
 Feedback information.
    Old value was 50, New value is 50
    CIBDT stall count: 0

NPAGEDYN parameter information:
 Feedback information.
    Old value was 2125824, New value is 1913344
    Maximum observed non-paged pool size: 2125824 bytes.
    Non-paged pool request rate: 205 requests per 10 sec.

LNMSHASHTBL parameter information:
 Feedback information.
    Old value was 128, New value is 128
    Current number of shareable logical names: 245

ACP_DIRCACHE parameter information:
 Feedback information.
    Old value was 502, New value is 502
    Hit percentage: 98%
    Attempt rate: 143 attempts per 10 sec.

ACP_DINDXCACHE parameter information:
 Feedback information.
    Old value was 125, New value is 125
    Hit percentage: 98%
    Attempt rate: 159 attempts per 10 sec.

ACP_HDRCACHE parameter information:
 Feedback information.
    Old value was 502, New value is 602
    Hit percentage: 45%
    Attempt rate: 95 attempts per 10 sec.

ACP_MAPCACHE parameter information:
 Feedback information.
    Old value was 20, New value is 20
    Hit percentage: 75%
    Attempt rate: 0 attempts per 10 sec.

PAGEDYN parameter information:
 Feedback information.
    Old value was 2117632, New value is 2117632
    Current paged pool usage: 770592 bytes.
    Paged pool request rate: 158 requests per 10 sec.
 PQL_DPGFLQUOTA has been increased to accomodate the working set
 requirements of PQL_DWSEXTENT.
 PQL_DPGFLQUOTA has been increased to accomodate the working set
 requirements of PQL_DWSEXTENT.
 PQL_MPGFLQUOTA has been increased to accomodate the working set
 requirements of PQL_MWSEXTENT.
 PQL_MPGFLQUOTA has been increased to accomodate the working set
 requirements of PQL_MWSEXTENT.

SCSSYSTEMID parameter information:
 Override Information - parameter calculation has been overridden.
    The calculated value was 0.  The new value is 1025.
    SCSSYSTEMID has been set to the hard-coded value of 1025.

Page, Swap, and Dump file calculations

  Page and Swap file calculations.

PAGEFILE1_SIZE information (for SYS$SYSTEM:PAGEFILE.SYS):
 Feedback information.
    Old value was 122000, New value is 61000
    Maximum observed usage: 0
 SYS$SYSTEM:PAGEFILE.SYS would have been created with 61000 blocks.

SWAPFILE1_SIZE information (for SYS$SYSTEM:SWAPFILE.SYS):
 Feedback information.
    Old value was 27000, New value is 13500
    Maximum observed usage: 0
 SYS$SYSTEM:SWAPFILE.SYS would have been created with 13500 blocks.

  Dumpfile calculations:
 Current dump file is SYS$SPECIFIC:[SYSEXE]SYSDUMP.DMP
 Current dump file size is currently 131081.
 Please leave in place the 2049 block file called
 BUCHEP$DUA0:[SYS0.SYSEXE]ERRORLOG.DMP;, as required
 to accomodate error log buffers.

There have been changes to gblpages but cc064 still gives the same errors. 
This is getting old. I think I'll let it go after this.

Bill