[Info-vax] Product command

[Jan-Erik Söderholm]

Den 2018-05-22 kl. 22:14, skrev Bill Cunningham:
> "Jan-Erik Söderholm" <jan-erik.soderholm at telia.com> wrote in message
> news:pe1ssu$sic$1 at dont-email.me...
> 
> ...
> 
> Here's the name of the file. It's in all caps. When unzipped it's the same
> only in lower case. And there's no "-ZIP".
> 
> DEC-VAXVMS-TCPIP-V0501-15-1.PCSI-ZIP
> 
> Bill
> 
> 

OK, fine. Just unzip on the VMS system. Or make sure that you
understand how to eventually correct a corrupt file.

So where came that "dec_vaxv.pcsi" name from? Did you try to
make up a name yourself? Not a good idea.

The file above could be installed with the command:

$ prod inst tcpip

or listed with the command

$ prod list tcpip

 > I'll have to look at what I copied and look for a VMS unzip.

Yes, always the best method.

 > I used linux's unzip.

That *could* work. Hm, maybe even *should* work, if the PCSI file
have a usual 512 byte record format.

Start with making sure that you keep the file name intact.