[Info-vax] Product command

[Bill Cunningham]

"Jan-Erik Söderholm" <jan-erik.soderholm at telia.com> wrote in message 
news:pe1ubp$sic$2 at dont-email.me...
> Den 2018-05-22 kl. 22:14, skrev Bill Cunningham:
>> "Jan-Erik Söderholm" <jan-erik.soderholm at telia.com> wrote in message
>> news:pe1ssu$sic$1 at dont-email.me...
>>
>> ...
>>
>> Here's the name of the file. It's in all caps. When unzipped it's the 
>> same
>> only in lower case. And there's no "-ZIP".
>>
>> DEC-VAXVMS-TCPIP-V0501-15-1.PCSI-ZIP
>>
>> Bill
>>
>>
>
> OK, fine. Just unzip on the VMS system. Or make sure that you
> understand how to eventually correct a corrupt file.
>
> So where came that "dec_vaxv.pcsi" name from? Did you try to
> make up a name yourself? Not a good idea.
>
> The file above could be installed with the command:
>
> $ prod inst tcpip
>
> or listed with the command
>
> $ prod list tcpip
>
> > I'll have to look at what I copied and look for a VMS unzip.
>
> Yes, always the best method.
>
> > I used linux's unzip.
>
> That *could* work. Hm, maybe even *should* work, if the PCSI file
> have a usual 512 byte record format.
>
> Start with making sure that you keep the file name intact.

    OK thanks I was reading the manual online. It was talking about PCF 
files and attrib commands after file names. IDk all that now. I just wanted 
to get the tcp/ip in. Thanks much.

Bill