[Info-vax] SOLVED : Re: Process quota problem after upgrade to 8.4-2L1

[Dave Froble]

On 12/22/2020 1:05 PM, Arne Vajhøj wrote:
> On 12/22/2020 9:33 AM, Phillip Helbig (undress to reply) wrote:
>> In article <rrsk17$10p8$1 at gioia.aioe.org>, Joukj
>> <joukj at hrem.nano.tudelft.nl> writes:
>>> Thanks Hoff, You pointed me to the Right solution: Doubling all the
>>> pql_m* parameters did not help. But setting PQL_MPGFLQUOTA to 18000000
>>> (may be too high but set the same as for "user" system) did the trick.
>>> So also Tad's suggestion was correct. It wer the pagefile-quota.
>>
>> I'll see if this helps my problem.  I remember adjusting quotas, but not
>> system parameters.
>
> My understanding is that setting PQL_MPGFLQUOTA sets
> the minimum PGFLQUOTA so that even those usernames
> with lower values in SYSUAF get the PQL_MPGFLQUOTA
> value.
>
> Are there scenarios where PQL_MPGFLQUOTA is required because
> SYSUAF value is not used??
>
> Arne
>
>

This is from 30+ year old memory.  Beware!

There are times when no user account is yet available.  At that time, 
the PQL quotas are used.  Should one not be adequate, the debugging gets 
"interesting".

At least that's my dim recollection of the issue.

-- 
David Froble                       Tel: 724-529-0450
Dave Froble Enterprises, Inc.      E-Mail: davef at tsoft-inc.com
DFE Ultralights, Inc.
170 Grimplin Road
Vanderbilt, PA  15486