[Info-vax] Looking for firmware of an old HP Controller MSA2000SA AJ754A

[malekar san]

Let's get to the basic to find where the problem is and then decide if we
require a firmware update or not, If you have already carved a lun on the
MSA and the the server is attached to the fabric
1. Check to see if zone is properly configured. confirm wwn of the msa and
the wwn of the server in the zone config.
2. Zoneset should see the zone and is in the active zoneset
3. Do a flogi to see if the server has logged in the san switch (show flogi
will tell you for msa & server). (If flogi does not show the wwn, go step
back)
4. Considering if all this is good, bring the server up and in the console
check to see if you are able to see the lun by using the fc utility (If
you don't see the lun here then no point booting the server).
iLO will also tell you if you are able to see the connection to the MSA

Let me know if you have done all this.

Regards
San

On Thu, Mar 3, 2022 at 6:45 AM 'eh' via comp.os.vms <
comp.os.vms at googlegroups.com> wrote:

> I'm using the Fibre Channel option but there is a SAS option, too.
>
> It's called msa2000sa. You have add a M700-mezzazine controller and a
> SAS Blade Switch (HP AJ864A).
>
> This configuration produces my problems.
>
> Eberhard
>
> Am 02.03.2022 um 23:48 schrieb malekar san via Info-vax:
> > On Tuesday, March 1, 2022 at 2:30:05 AM UTC-8, vax... at googlemail.com
> wrote:
> >> Thank you.
> >>
> >> I've already found a source.
> >>
> >> I still have problems to activate the communication between my C7000
> >> Blade and the RAID-Controller.
> >>
> >> Eberhard
> >> Am 01.03.2022 um 00:55 schrieb malekar san via Info-vax:
> >>> On Saturday, December 18, 2021 at 7:46:35 AM UTC-8,
> vax... at googlemail.com wrote:
> >>>> Hi,
> >>>>
> >>>> I'm trying to activate an old HP controller but no disks are show.
> >>>> It might be a problem of the old firmware version ( W430R31).
> >>>>
> >>>> Is there someone who has saved the firmware of this controller?
> >>>>
> >>>> thanx
> >>>> Eberhard
> >>> Hello,
> >>>
> >>> I do have some firmware CD's, Let me know if you need them.
> >>>
> >>> Regards
> >>> San
> >>> _______________________________________________
> >>> Info-vax mailing list
> >>> Info... at rbnsn.com
> >>> http://rbnsn.com/mailman/listinfo/info-vax_rbnsn.com
> >>>
> > I am unable to understand your problem, how are you connecting msa2000
> to C7000. MSA2000 is a raid controller, are you using fiber channel ?. Have
> you zoned correctly. Need more information.
> >
> > Regards,
> > San
> > _______________________________________________
> > Info-vax mailing list
> > Info-vax at rbnsn.com
> > http://rbnsn.com/mailman/listinfo/info-vax_rbnsn.com
> >
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
>
> --
> You received this message because you are subscribed to a topic in the
> Google Groups "comp.os.vms" group.
> To unsubscribe from this topic, visit
> https://groups.google.com/d/topic/comp.os.vms/h2p5s0nM9Kg/unsubscribe.
> To unsubscribe from this group and all its topics, send an email to
> comp.os.vms+unsubscribe at googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/comp.os.vms/mailman.0.1646318431.17909.info-vax_rbnsn.com%40rbnsn.com
> .
>