[Info-vax] Need help mounting shadow set

[Tom Adams]

On Oct 5, 3:16 pm, "Richard B. Gilbert" <rgilber... at comcast.net>
wrote:
> Tom Adams wrote:
> > On Oct 5, 2:04 pm, Joseph Huber <joseph.hu... at NIRWANA.web.de> wrote:
> >> tadamsmar schrieb:
>
> >>> I had to replace one of my disks that was logging errors.  I bought
> >>> exactly the same make and model disk.  But it will not mount.  I am
> >>> getting an error saying the disk is too small.
> >>> The new disk shows:
> >>> Disk $1$DKA100: (EESN), device type COMPAQ ST32171W, is online, file-
> >> [snip] ...
> >>>     Total blocks             4110000    
> >>> The current system disk that I want to shadow shows:
> >>> Disk DSA0:, device type DEC RZ1BB-CS, is online, mounted, file-
> >> [snip]...
>
> >>>     Total blocks             4110480    
> >> The disk might be the same physically, but apparently has different
> >> firmware leading to different "device type", and slightly less blocks:
> >> these tiny 480 blocks missing.
>
> >> --
>
> >>   Joseph Huber   -http://www.huber-joseph.de
>
> > I guess I can do a copy to the new disk and then boot with it as the
> > shadow master,  then I can add the old disk to the shadow set.
>
> > Is there a way to do a direct copy. Or do I have to do a backup image
> > and then copy to the other disk?
>
> $ BACKUP /IMAGE DISK1 DISK2- Hide quoted text -
>
> - Show quoted text -

I needed:

BACKUP/IGNORE=NOBACKUP ...

To get everything.

I wonder if I should include /ignor=label ?